Vszerda Internal Mini SAS SFF-8087 to Mini SAS HD SFF-8643 Cable 50cm
Connects a SAS/SATA adapter to a backplane with Mini SAS SFF-8087 to HD SFF-8643 connectors, 50 cm long, supporting 6 Gb/s SAS 2.1
- Connects SAS/SATA adapter to backplane using SFF-8087 and SFF-8643 ports
- Meets SAS 2.1 6Gb/s specification with high-density SFF-8643 connectors
- Supports future SAS 3.0 12Gb/s speeds through next-generation connector design
- 50cm internal copper cable for compact server chassis routing
- Compatible with listed LSI and Adaptec RAID controllers including 9207-8i and 8885Q
Connector bridge for SAS/SATA adapters
This new cable links a Mini SAS SFF-8087 port to a Mini SAS High Density SFF-8643 port. It connects a SAS or SATA adapter to a SAS or SATA backplane inside a server or storage enclosure. The 50 cm length suits typical internal routing.
SAS 2.1 rated at 6Gb/s per lane
The SFF-8643 connector follows the SAS 2.1 standard and meets the 6Gb/s specification. The same connector family is designated for the future SAS 3.0 standard at 12Gb/s, though cable materials may change. Current use is limited to 6Gb/s operation.
SFF-8643 versus SFF-8644 port match
The cable terminates in an SFF-8643 plug, which fits the internal ports on cards such as the LSI 9207-8i and several Adaptec models listed in the compatibility notice. It will not mate with the external SFF-8644 ports found on controllers like the LSI 9202-16e.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Should I pick the 50 cm length or a different size for my server chassis?
The 50 cm length suits typical 1U to 2U rack layouts where the RAID adapter and backplane sit close together; measure your exact run before ordering.
What does the 6 Gb/s SAS 2.1 rating mean once the cable is installed?
Each of the four lanes carries up to 6 Gb/s, so a SFF-8643 to SFF-8087 link delivers 24 Gb/s aggregate throughput for SAS or SATA drives.
Does the SFF-8643 connector limit me to 6 Gb/s or can it handle 12 Gb/s SAS 3.0?
The SFF-8643 connector is specified for SAS 3.0 at 12 Gb/s, so the same cable will support next-generation controllers without replacement.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Cable Matters 104008-24x3 3-Pack 90° SATA Cable 24in Red
- Sata
- SATA





