Vszerda M.2 M-key NVME to PCIe adapter low-profile 3cm 1U server
Connects M-key NVMe SSDs to PCIe 3.0 slots, drawing 12 V or 5 V power from the bus, in a 3 cm low-profile bracket for 1U servers
- Supports M-key NVMe SSDs in sizes 2230, 2242, 2260, 2280, 22110
- Fits 1U servers with 3 cm low-profile bracket height
- Draws 12 V/3 A or 5 V/4.5 A power from PCIe slot
- Works on Z97 motherboards with Windows 10 or later
- Driver-free operation — transparent to the operating system
M.2 M-key NVME to PCIe adapter
This adapter connects M-key NVME SSDs in 2230, 2242, 2260, 2280 and 22110 lengths to a PCIe 3.0 slot at x16, x8 or x4. It is designed for system builders who need to add fast storage to a platform with a spare PCIe lane. It does not support B-key or B/M-key SATA SSDs.
Low-profile 3 cm bracket for 1U servers
The card uses a 3 cm tall bracket that fits 1U server chassis and draws 12 V at 3 A or 5 V at 4.5 A directly from the PCIe slot. No external power cable is required, so cable routing stays simple inside dense enclosures.
Requires Z97 motherboard and Windows 10 or later
The adapter is transparent to the operating system and needs no driver, but the supplier states a Z97 chipset and Windows 10 as minimum requirements. Builders on older chipsets or earlier Windows versions cannot use this card.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $18.99
- Pricier than about 70% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the PCIe 3.0 x16 slot limit the NVMe drive to x4 speeds?
The adapter connects an M-key NVMe SSD through a PCIe 3.0 x16 slot that also accepts x8 or x4, so the drive runs at its native x4 lane width.
Will the 3 cm low-profile bracket fit my 1U server chassis?
Yes, the bracket height is 3 cm and supports M.2 lengths of 2230, 2242, 2260, 2280 and 22110, matching 80 mm and 110 mm drives in a 1U server.
Do I need to install a driver for the adapter to work?
No driver is required; the adapter is transparent to the operating system provided the motherboard is Z97 or newer and Windows 10 or later is installed.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
CableCreation Mini SAS SFF-8087 to Right Angle SFF-8087 Cable 2.5FT
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
KEHIPI E55 SATA to USB 3.0 Adapter Cable 9 Inches Grey
- Usb a 3.0
- Male-to-Male





