Vszerda M.2 NVME to SFF-8611/8612 Oculink Adapter
Connects M.2 NVME SSDs in 2230, 2242, 2260, 2280 or 22110 sizes to a host via SFF-8611 or SFF-8612 Oculink using PCIe 3.0 x4
- Conductor typeCopper
- Connect M.2 NVME SSDs via SFF-8611/8612 Oculink
- Supports 2230, 2242, 2260, 2280, 22110 form factors
- PCIe 3.0 x4 interface for NVME storage
- Copper conductor ensures reliable signal transmission
- Lightweight 0.04 oz adapter for internal installation
NVMe to Oculink Adapter
The Vszerda adapter connects a single M.2 NVMe PCIe SSD to a host through an SFF-8611 or SFF-8612 Oculink interface. It accepts drives in 2230, 2242, 2260, 2280 and 22110 lengths. The card is designed for internal installation and targets builders adding high-speed storage to compatible mainboards or controllers.
PCIe 3.0 x4 Interface Limit
The adapter operates over a PCIe 3.0 x4 link, so maximum throughput is capped by that generation and lane count. It does not translate NVMe to SATA, nor does it convert NGFF or SATA M.2 drives to Oculink. SAS and Slimline SAS devices are not supported, so the link remains strictly PCIe-based.
Supported Drive Lengths and Exclusions
The board physically accommodates M.2 modules from 2230 up to 22110 millimetres, giving flexibility for common SSD sizes. It cannot host SATA-based M.2 drives, nor can it bridge to SAS or Slimline SAS targets. Builders needing SATA connectivity or multi-drive aggregation must use a different solution.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 73% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Chenyang |
| Model name | CY-SF-046 |
| Size & build | |
| Conductor type | Copper |
Questions about this item
Which M.2 form factors does this adapter accept?
The board fits one NVMe SSD in 22110, 2280, 2260, 2242 or 2230 length.
What PCIe link speed does the SFF-8611/8612 connection run at?
The adapter uses a PCIe 3.0 x4 link, so the drive operates at Gen 3 speeds.
Does the SFF-8611/8612 interface carry SAS or SATA signals?
No, the Oculink connectors are PCIe only and do not support SAS or SATA drives.
More in SATA & eSATA Drive Cables
Similar items
Electop Black-02 SATA III 90° braided cable 20 in black 5-pack
- Sata 3
- Composite
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
2-Power ST345AP SATA to USB Type-A Cable 1.8 in Red
- 1.8 in (4.57 cm)
- Type
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





