Vszerda MCIO 4x to U.2 SFF-8639 PCIe 5.0 Cable 50cm
Connects a U.2 SFF-8639 NVME drive to an MCIO 4x port at 56 GT/s over 50 cm, supporting PCIe 5.0/4.0/3.0 x4
- Rated speed56 Gbit/s
- Connector detailsPci-e 5.0 Mcio 4x
- Product typePCI-E MCIO
- Key featuresU.2
- Adds one MCIO 4x interface for NVME SSD expansion
- Supports PCIe 5.0 at 56 GT/s for maximum throughput
- Backward compatible with PCIe 4.0 and 3.0 x4
- 50 cm length fits dense server and workstation chassis
- Cable only — adapter card not included
Vszerda MCIO 4x to U.2 Cable
This 50 cm cable adds a single MCIO 4x interface to a mainboard, allowing connection of a U.2 SFF-8639 NVME SSD through an optional adapter. It carries PCI Express signals using the x4 protocol at up to 56 GT/s. The assembly targets builders who need to extend storage connectivity inside a server or workstation chassis. It is not for buyers who want a drive included or who require a different connector type.
Replaces direct onboard U.2 ports
Use this cord when the motherboard lacks a native U.2 header but exposes an MCIO 4x receptacle, or when routing a drive to a backplane demands a flexible 50 cm link. The jump is worth it if the platform supports PCIe 5.0 x4 and the workload can saturate 56 GT/s; otherwise a Gen 3 or 4 link will simply run at the lower speed. It is not for systems without an MCIO slot or for installations that need a longer or shorter reach.
Straightforward MCIO-to-U.2 routing
Plug the MCIO 4x end into the board and the SFF-8639 end into the drive or backplane; no drivers or firmware are involved. The cable-only package means an adapter card must be sourced separately if the drive lacks a native U.2 connector. Common issues include forgetting the adapter, exceeding the 50 cm length in large enclosures, or mating the keyed MCIO plug upside down. It is not for tool-less toolless trays that require a different latch style.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $32.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Vszerda |
| Model name | SF-081-HX |
| Product type | PCI-E MCIO |
| Performance | |
| Rated speed | 56 Gbit/s |
| Ports & slots | |
| Connector details | Pci-e 5.0 Mcio 4x |
Questions about this item
What MCIO connector width does this cable require on the motherboard?
The cable uses an MCIO 4x connector, so the board must provide a matching 4-lane MCIO slot.
Which end plugs in first when installing the Vszerda MCIO 4x to U.2 cable?
Connect the MCIO 4x end to the motherboard first, then attach the U.2 SFF-8639 end to the drive; reversing the order can bend the finer MCIO pins.
When should the 50 cm cable be replaced in a PCIe 5.0 server?
Replace it if the link drops from 56 GT/s to a lower speed or if the latch on either the MCIO 4x or U.2 SFF-8639 connector no longer holds firmly.
More in SATA & eSATA Drive Cables
Similar items
OWC In-Line Digital Thermal Sensor HDD Upgrade Cable for iMac 2011
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Nippon Labs S3L0.5-90/180SL-50P SATA cable 6 in 90/180° 50-pack
- 6 in (15.2 cm)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





