Vszerda MCIO 8i to 8x SATA Cable 0.3m
Connects an MCIO 8i host to eight SATA drives using a 0.3 m silver-plated AWG31 twinax cable with anti-detachment latches
- Connector detailsMcio 8i to 8x Sata
- Product typeSilver-plated AWG31 Twinax Cable
- Product colorBlack
- Overall length0.3
- Key featuresHigh Speed
- PCIe 4.0 support via MCIO SFF-TA-1016 8X 74Pin to 8x SATA 7Pin interface for high-speed data transfer
- Anti-detachment latch on reinforced MCIO connector with silver-plated AWG31 Twinax for reliable signal integrity
- 100-ohm impedance for stable signal transmission
- Compact 0.3m length suits tight server and RAID installations
- Compatible with NVMe HBAs and PCIe host adapters for storage expansion
MCIO 8i to 8x SATA cable
This cable connects a MCIO 8i host or RAID controller to eight SATA drives using a 74-pin SFF-TA-1016 interface. It is built for server storage backplanes and JBOD expansion where high-density drive connectivity is required. The 0.3 m length suits tight internal routing in dense chassis.
Builders needing eight SATA links from one MCIO port
Installers populating backplanes or direct-attached drive cages in 1 U and 2 U servers will find the short reach and anti-detachment latch practical. It is not suited for builders who need longer runs to external enclosures or who require more than eight SATA connections from a single cable.
PCIe 4.0 rated silver-plated AWG31 twinax
The cable meets the PCIe 4.0 standard and uses silver-plated AWG31 twinax conductors with 100-ohm impedance for signal integrity at high speed. This construction decides whether the link remains stable under sustained throughput in demanding server and RAID environments.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $21.99
- Pricier than about 78% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | 10Gtek |
| Product type | Silver-plated AWG31 Twinax Cable |
| Product color | Black |
| Ports & slots | |
| Connector details | Mcio 8i to 8x Sata |
Questions about this item
Does the silver-plated AWG31 twinax cable generate noticeable heat when running at PCIe 4.0 speeds all day?
The silver-plated AWG31 twinax construction maintains signal integrity at PCIe 4.0 without active cooling, so heat output stays negligible in typical server airflow.
Which host-side connector must my HBA or RAID card provide for this MCIO 8i plug to mate?
The cable requires an MCIO SFF-TA-1016 8X 74-pin receptacle on the host or RAID adapter.
Can I connect this cable to a backplane that only has legacy SATA 3.0 ports?
Yes, the eight SATA 7-pin targets are standard SATA 3.0 100-ohm interfaces compatible with existing backplanes.
More in SATA & eSATA Drive Cables
Similar items
SXDOOL SATA cable for ThinkPad T470 T480 A485 475 0UR495
- Case Fan Accessory
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Pagaloce SATA to USB 3.0 & Type-C Adapter Cable 1m Grey
- Sata, Usb Type C
- Male-to-Male





