Vszerda MCIO 8X SFF-8654 8i to 8X SATA 7P Left Female Cable .5m
Converts an MCIO 8X SFF-8654 8i interface to eight SATA 7P left female connectors for server and workstation storage expansion
- Connector detailsMcio
- Connector genderMale-to-Female
- Conductor typeCopper
- Product typeMCIO
- Product colorBlack
- Key featuresHigh Speed
- Supports PCI-E Ultraport Slimline 5.0 for efficient data transfer rates
- Converts MCIO 8X SFF-8654 8i to 8x SATA 7P left female connectors
- Built with high-quality materials for long-lasting reliability in data-intensive environments
- Clearly labeled connectors P1 to P8 enable hassle-free setup
- Compact cable arrangement minimises clutter and maximises airflow within the system
MCIO 8X to 8 SATA 7P conversion
This new Vszerda cable converts an MCIO 8X SFF-8654 8i PCI-E Ultraport Slimline 5.0 port into eight SATA 7P left female connectors. The .5 metre harness uses copper conductors and is designed for server or workstation storage expansion. Clearly labelled P1 to P8 ends simplify installation in dense chassis.
Builders adding SATA drives to an MCIO port
Suits administrators who need to break out a single MCIO 8X connection into multiple SATA devices for storage arrays or backup volumes. The left-angle SATA plugs and short length keep routing tidy. Builders who need right-angle SATA plugs, longer reach or a different connector orientation should choose another harness.
MCIO 8X SFF-8654 8i to 8 SATA 7P interface
The decisive specification is the MCIO 8X SFF-8654 8i male plug mating with a PCI-E Ultraport Slimline 5.0 receptacle and fanning out to eight SATA 7P left female sockets. Verify that the host board presents this exact MCIO pinout and that the drive bays accept left-facing SATA connectors before ordering.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $32.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ST-JY |
| Product type | MCIO |
| Product color | Black |
| Ports & slots | |
| Connector details | Mcio |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | Copper |
Questions about this item
How do I connect the MCIO 8X SFF-8654 8i end to the motherboard and avoid mis-wiring the eight SATA drives?
Plug the male MCIO connector into the matching PCI-E Ultraport Slimline 5.0 port on the board, then attach each labeled P1-to-P8 lead to its corresponding SATA 7P left female drive connector in sequence.
Will the copper conductors or the SATA 7P left female connectors need periodic replacement?
The copper conductors and SATA 7P left female connectors are solid-state with no moving parts, so they do not wear out; only physical damage or corrosion would require a new cable.
At what point does the .5 m length limit signal integrity under sustained PCI-E 5.0 traffic?
The half-metre length is within the PCI-E Ultraport Slimline 5.0 specification, so sustained throughput is maintained without an active repeater or equaliser.
More in SATA & eSATA Drive Cables
Similar items
OWC In-Line Digital Thermal Sensor HDD Upgrade Cable for iMac 2011
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs S3L0.5-90/180SL-50P SATA cable 6 in 90/180° 50-pack
- 6 in (15.2 cm)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





