Vszerda MCIO SFF-8654 8i PCIe 5.0 to 8x SATA 7P Right Female Cable 50cm
Connects an MCIO SFF-8654 8i port to eight right-angle SATA drives at up to 16G transfer rate
- Connector detailsMcio
- Connector genderMale-to-Female
- Product typeSAS
- Overall length18
- Key featuresHigh-speed transfer, right-angle SATA connectors
- Connects 8 SATA drives through one MCIO 8654 port
- Right-angle SATA plugs fit tight server chassis
- 50 cm length gives flexible routing inside enclosures
- PCIe 4.0 harness supports up to 16 G transfer rate
- Durable build withstands demanding storage environments
MCIO SFF-8654 8i to 8 SATA breakout cable
This new Vszerda cable converts a single MCIO SFF-8654 8i port into eight SATA 7P right-angle female connectors, letting servers and storage arrays attach multiple SATA drives through one high-density interface. The 50 cm length suits typical chassis routing without excess slack.
Check MCIO port keying
Verify that your backplane or controller exposes an MCIO SFF-8654 8i receptacle with the correct pin-out, as keying differs from other MCIO variants. Ensure each right-angle SATA connector has room to seat fully against the drive PCB without fouling adjacent components or cable-management bars.
Sustained 16 Gbit/s aggregate bandwidth over PCIe
The harness is rated for up to 16 Gbit/s total throughput, so continuous sequential workloads across all eight drives remain stable without the thermal throttling sometimes seen on shorter-burst benchmarks. Durable materials and secure crimps maintain signal integrity during extended RAID rebuilds or backup windows.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $32.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ST-JY |
| Model name | MCIOSFF8654-8 × 7P-FR |
| Product type | SAS |
| Ports & slots | |
| Connector details | Mcio |
| Connector gender | Male-to-Female |
Questions about this item
Does the cable come with any drive brackets or mounting hardware, or is it just the cable itself?
The package contains only the MCIO SFF-8654 8i to 8 SATA 7P cable. No brackets, screws or additional mounting hardware are included.
The title mentions PCIe 5.0 but the highlights say PCIe 4.0 — which link speed does the cable actually support?
The cable is built for a PCIe 5.0 MCIO 8i host connector and carries 8 independent SATA lanes; the 16G transfer rate noted in the highlights corresponds to PCIe 4.0 x8 bandwidth.
What does the 16G transfer rate mean when I connect eight SATA SSDs to this cable?
The 16G figure is the aggregate host-side bandwidth across the PCIe 4.0 x8 link; each SATA drive still runs at its native 6 Gb/s, so the cable does not increase per-drive speed.
More in SATA & eSATA Drive Cables
Similar items
OWC In-Line Digital Thermal Sensor HDD Upgrade Cable for iMac 2011
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs S3L0.5-90/180SL-50P SATA cable 6 in 90/180° 50-pack
- 6 in (15.2 cm)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





