Vszerda MCIO SFF-8654 8i to 8×SATA 90° 80 cm
Converts an MCIO SFF-8654 8i link to eight 90-degree SATA ports with PCIe 4.0 bandwidth up to 16G
- Connector detailsMcio
- Product typeSAS
- Overall length18
- Key featuresHigh-speed transfer, 90-degree SATA connectors, durable buil
- Connect 8 SATA drives via one MCIO 8654 8i port
- 90-degree SATA plugs fit tight server chassis
- PCIe 4.0 harness delivers 16 Gbps per lane
- 80 cm length reaches across full-height enclosures
- New cable rated for SAS and SATA workloads
MCIO SFF-8654 8i to 8 SATA cable
This new Vszerda adapter connects a single MCIO SFF-8654 8i port to eight SATA 7-pin female connectors. The 90-degree SATA ends save space inside dense server chassis. It is built for administrators who need to attach multiple SATA drives to a modern backplane or controller. Builders without an MCIO 8i source port cannot use this cable.
PCIe 4.0 x8 lane bandwidth
The cable harness is rated for PCIe 4.0 signalling and supports up to 16G transfer rate across the link. This single specification determines whether the host slot can saturate eight SATA streams simultaneously. If the platform only provides PCIe 3.0 lanes the maximum throughput will be lower.
Sustained multi-drive throughput
Under continuous load the assembly maintains signal integrity across all eight channels at the rated 16G rate. The 80 cm length and durable construction keep latency stable during long rebuilds or bulk data migrations. Thermal throttling is not a factor because the cable carries no active components.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $38.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ST-JY |
| Model name | MCIOSFF8654-8XST-FS |
| Product type | SAS |
| Ports & slots | |
| Connector details | Mcio |
Questions about this item
What does the 16G transfer rate mean when the cable is installed in a server?
The 16G rate is the PCIe 4.0 x8 lane bandwidth ceiling; each of the eight SATA drives will still be limited to the SATA 6 Gb/s link speed.
How does the SFF-8654 8i interface limit real-world throughput?
The SFF-8654 8i connector carries eight PCIe 4.0 lanes, so the aggregate ceiling is 16 GT/s, but individual SATA ports cannot exceed 6 Gb/s.
What clearance does the 90-degree SATA end need inside a chassis?
Each 90-degree SATA 7P female plug requires enough depth for the right-angle bend plus the 80 cm cable routing to the drive bays.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Zebra 25-66431-01R 1.05 ft eSATA cable
- 1.05 ft (0.32 m)
- Data Transfer Cable
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Lemonra 5 Port Non-RAID SATA III 6GB/s JMB585 adapter card
- System Requirements…
- Black





