Vszerda MCIO SFF-8654 8i to 8x SATA 90° Cable 100cm
Connects an MCIO SFF-8654 8i host to eight 90-degree SATA drives at 16G transfer rate over a 100cm cable
- Connector detailsMcio
- Product typeSAS
- Overall length18
- Key featuresHigh-speed transfer, 90-degree SATA connectors, durable buil
- Connects 8 SATA drives via MCIO SFF-8654 8i
- 90-degree SATA connectors save space in tight chassis
- PCIe 4.0 harness supports up to 16G transfer rate
- 100 cm length gives flexible routing in servers
- Durable construction ensures stable operation in demanding environments
MCIO SFF-8654 8i to 8x SATA 90° Cable 100cm
This cable adapts a single MCIO SFF-8654 8i port into eight 90-degree SATA 7-pin female connectors. It is built for server and storage chassis that need to attach multiple SATA drives to a high-density controller interface. The 100 cm length suits full-height rackmount enclosures and workstation builds.
Upgrading from direct backplane
The assembly replaces a direct backplane link or a lower-count breakout when the host only exposes an MCIO 8i connector. The jump is worth it when the platform supports PCIe 4.0 or 5.0 signalling and the workload demands up to 16 G transfer rates across all eight lanes simultaneously.
Sustained throughput with eight concurrent drives
Rated for PCIe 4.0 and 5.0 harness operation, the cable maintains the 16 G lane speed under continuous multi-drive load rather than only in short bursts. The 90-degree SATA ends reduce cable stress in dense drive bays, helping signal integrity stay stable during extended RAID rebuilds or bulk data migrations.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $37.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ST-JY |
| Model name | MCIOSFF8654-8XST-FS |
| Product type | SAS |
| Ports & slots | |
| Connector details | Mcio |
Questions about this item
What clearance does the 90-degree SATA connector need behind the drive?
The 90-degree SATA 7P female connectors sit flush against the drive edge, so allow roughly 18 mm of depth behind each SATA port for the right-angle moulding.
Which end plugs in first when installing the MCIO SFF-8654 8i to 8x SATA cable?
Seat the MCIO SFF-8654 8i plug into the host controller until the latch clicks, then attach each 90-degree SATA 7P female connector to the drives; reversing the order can bend the slim MCIO pins.
When should the 100 cm cable be replaced in a PCIe 4.0 16G transfer environment?
Replace the cable if the latch tabs fracture, the 90-degree SATA hoods crack, or intermittent link errors appear on any of the eight SATA channels during sustained 16G traffic.
More in SATA & eSATA Drive Cables
Similar items
Lemonra 5 Port Non-RAID SATA III 6GB/s JMB585 adapter card
- System Requirements…
- Black
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Graviton SATA/SAS Controller Card LSI 9261-8i 512MB Cache SFF-8087 PCI-E 2.0 X8
- Controller Card
- Green
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





