Vszerda Mini PCIe to Dual USB 3.0 20-pin Adapter with SATA Power
Adds two internal USB 3.0 headers through a Mini PCIe slot, powered by a SATA 15-pin connector and driven by a NEC UPD720202 chipset
- Adds two USB 3.0 ports via Mini PCIe slot
- Powered by SATA 15-pin connector from PSU
- Uses NEC UPD720202 chipset for 5Gbps transfer
- Backward compatible with USB 2.0, 1.1 and 1.0
- Supports hot-swap on Windows XP, Vista, 7, 8, Linux
Mini PCIe to Dual USB 3.0 Adapter
This adapter converts a motherboard Mini PCI Express slot into a dual USB 3.0 20-pin header. It uses the NEC UPD720202 chipset to provide two high-speed ports for internal USB expansion. The card draws power from a SATA 15-pin connector on the power supply. It suits embedded or micro systems that need extra USB connectivity.
Fits Mini PCIe only not mSATA
Builders with a free Mini PCIe slot who want to add front-panel USB 3.0 ports will find this card useful. It does not work in mSATA sockets despite the similar physical connector. Systems lacking a Mini PCIe slot or a spare SATA power connector cannot use this adapter. Buyers needing external USB ports or a different interface should look elsewhere.
NEC UPD720202 chipset 5 Gbps USB 3.0
The NEC UPD720202 controller delivers USB 3.0 speeds up to 5 Gbps and is backward compatible with USB 2.0 1.1 and 1.0 devices. It complies with PCI Express Specification Revision 2.0 and xHCI specification version 1.0. Hot-swap functionality is supported. Drivers are available for Windows XP 2003 Vista 7 8 and Linux.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 63% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does my power supply need a SATA 15pin connector to run this adapter?
Yes, the card draws its power from a SATA 15pin header on the PSU.
Will the NEC UPD720202 chipset work with USB 2.0 headers I already have on my motherboard?
The adapter outputs a USB 3.0 20pin header that is backwards compatible with USB 2.0, 1.1 and 1.0 devices.
How can I verify the adapter is running at USB 3.0 5Gbps after installation?
Connect a USB 3.0 device and check the OS reports a SuperSpeed connection at 5Gbps.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATRD30CM 30cm SATA cable latching 6Gbps
- 11.81 in (30 cm)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Transway's Marketplace DT-5025D USB 2.0 to SATA 2.5" cable .5 ft
- Usb2.0 to sata and…
- Clear Blue
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





