Vszerda Mini SAS 4i SFF-8087 to HD Mini SAS SFF-8643 Cable 3.3ft
Connects a Mini SAS 4i SFF-8087 host to a high-density SFF-8643 backplane at 12 Gb/s over 3.3 ft
- Rated speed12 Gbit/s
- Connector detailsMini Sas
- Connector genderMale-to-Female
- Conductor typeCopper
- Product typeSAS
- Product colorBlack
- Supports 12 Gb/s SAS 3.0 speeds
- SFF-8643 HD connector saves PCB space
- Connects SFF-8087 36-pin to SFF-8643
- 3 ft length fits standard chassis
- Copper conductors ensure reliable signal transfer
Internal SAS cable for host-to-backplane links
This 3.3ft cable connects a standard Mini SAS 36pin SFF-8087 host adapter to a High Density SFF-8643 backplane. It carries SAS 2.1 at 6Gb/s and SAS 3.0 at 12Gb/s over copper conductors. The male-to-female layout fits typical internal RAID or HBA installations.
Fits tight controller and backplane layouts
The SFF-8643 connector uses less PCB real estate than the legacy 36pin design, freeing space on dense host cards and backplanes. No external power or active circuitry is required. The 3.3ft length suits standard chassis routing without excess slack.
Replaces legacy SFF-8087-to-SFF-8087 runs
Builders upgrading from 6Gb/s-only backplanes gain 12Gb/s headroom when both ends support SAS 3.0. The hybrid pinout also works with existing 6Gb/s gear, so the jump is worth it when the controller or backplane moves to the HD connector.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 73% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | EDIMS |
| Model name | 4351108894 |
| Product type | SAS |
| Product color | Black |
| Performance | |
| Rated speed | 12 Gbit/s |
| Ports & slots | |
| Connector details | Mini Sas |
| Connector gender | Male-to-Female |
| Size & build | |
| Overall length | 3.3 ft (1.01 m) |
| Conductor type | Copper |
Questions about this item
What data rate does the 12 Gb/s cable sustain under continuous load?
The assembly is rated for SAS 3.0 at 12 Gb/s, matching the connector specification for sustained throughput.
Does the SFF-8643 connector generate noticeable heat during all-day operation?
The passive copper conductors and shielded design add no active heat; any warmth comes from the attached controller or backplane.
Which controller port does the SFF-8087 end plug into?
The 36-pin SFF-8087 male connector fits a standard 4i SAS/SATA host adapter or RAID card port.
More in SATA & eSATA Drive Cables
Similar items
Electop Black-02 SATA III 90° braided cable 20 in black 5-pack
- Sata 3
- Composite
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
2-Power ST345AP SATA to USB Type-A Cable 1.8 in Red
- 1.8 in (4.57 cm)
- Type
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





