Vszerda Mini-SAS HD SFF-8643 to 4× SFF-8482 SATA Power Cable 0.5 m Pack of 2
SFF-8643 host breakout cable splits to four SFF-8482 connectors with SATA 7-pin data and 15-pin power for 6 Gbps per drive
- Product colorBlack/Blue
- Connects controller to four drives via SFF-8643 to SFF-8482 breakout
- Supports 6 Gb/s per drive with SATA 7-pin data and 15-pin power
- Thin 30 AWG braided cable at 0.5 m length for easy routing
- Pack of two cables labelled for simple cable management
- Host SFF-8643 male plugs into HBA or motherboard for storage expansion
Vszerda SFF-8643 breakout cable
This Vszerda cable splits one internal Mini-SAS HD SFF-8643 male connector into four SFF-8482 connectors, each carrying a SATA 7-pin data and 15-pin power interface. It connects a SAS HBA or PCIe controller to up to four SAS or SATA drives. The pack contains two cables, each 0.5 metres long, built with 30 AWG braided wiring for flexible routing.
Who this suits and who it does not
Builders expanding internal storage using a controller with an SFF-8643 port will find this breakout practical. It is not for users whose backplane or drives require the missing middle SAS pins on the SFF-8482 side, nor for anyone needing a direct SFF-8643 to SFF-8643 link. Buyers wanting longer reach should note the fixed 0.5 metre length.
Build integration and clearance
The SFF-8643 host end plugs into a compatible HBA, RAID card or motherboard header, while each SFF-8482 tail attaches to a drive or backplane bay. Every tail demands a separate SATA power connection from the PSU. The thin, taped braid eases cable management in tight chassis, and the labelled ends simplify identification during assembly or maintenance.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $33.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | Mini SAS-012 |
| Product color | Black/Blue |
Questions about this item
Do I need a controller with an SFF-8643 port to use this cable?
Yes, the host side uses an internal MiniSAS HD SFF-8643 male connector that must plug into a compatible controller or motherboard port.
Will the SFF-8482 connectors work with my existing SATA hard drives?
Each SFF-8482 adapter includes a SATA 7-pin data and 15-pin power connector, so standard SATA drives attach directly.
How can I verify the link is running at the expected 6 Gbps per drive?
Check the controller BIOS or operating system disk utility; it should report a 6 Gbps negotiated speed for each connected drive.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs S3L0.5-90/180SL-50P SATA cable 6 in 90/180° 50-pack
- 6 in (15.2 cm)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
BUCIER M.2 Key M to PCIe 4.0 X16 Riser Cable 300mm SATA Power
- 8 GB/s
- Male-to-Female
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





