Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 0.5 m Mini SAS HD SFF-8644 cable rated for 12 Gbps per channel with 100-ohm impedance
This 0.5 m passive copper cable carries two SFF-8644 Mini SAS HD connectors in a male-to-male arrangement. Each channel supports up to 12 Gbps with a controlled 100-ohm impedance. The high-density interface suits NVMe enclosures, SAN equipment and JBOD arrays where rack space is tight.
The assembly follows the SAS 2.1 and proposed SAS 3.0 electrical specifications for 6 G and 12 G operation. An on-board EEPROM lets the host identify cable type and length automatically. Improved latch geometry lowers insertion force while raising retention force for a secure fit.
The reduced connector footprint leaves extra room on low-profile PCIe cards that can accept four 4x Mini SAS HD ports instead of two legacy Mini SAS ports. The 26-conductor passive design needs no external power and adds no active heat or noise to the chassis.
Buyers who need longer reach than 0.5 m or optical isolation for electrically noisy environments must choose an active optical cable instead. This copper assembly is limited to short intra-rack links and cannot span between racks or rooms.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | 10Gtek |
| Product type | Mini SAS |
| Product color | 1PC |
| Performance | |
| Rated speed | 12 Gbit/s |
| Ports & slots | |
| Connector count | 26 |
| Connector details | Sff-8644 to Sff-8644 |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | High Speed |
Align the male SFF-8644 ends with the Mini SAS HD ports, push straight in until the improved latch clicks, and pull the release tab — not the cable — to unplug.
No, the passive cable has no active components; the EEPROM signature is read-only and requires no maintenance.
The 100-ohm impedance and shielding are rated for 12 Gbps per channel at this length; sustained loads stay within spec without added equalisation.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?