Vszerda Mini SAS HD SFF-8644 with IC to 4 SATA 7-Pin Cable 2m
Converts a Mini SAS HD SFF-8644 interface to four SATA 7-pin connectors for 6Gbps server storage links using 28AWG copper wire tested to 300V
- 6 Gbps single-channel bandwidth for stable server-to-storage transfer
- SFF-8644 with IC converts to four SATA 7-pin connectors for HDDs and SSDs
- UL20276 28AWG copper wire provides excellent conductivity and long-lasting durability
- 100 % open and short tested with 300 V DC withstand and 10 M insulation resistance
- 2 m length suits servers, RAID controllers and data center integration
Mini SAS HD SFF-8644 with IC to 4 SATA
This cable converts a Mini SAS HD SFF-8644 port with an integrated circuit into four SATA 7-pin connectors. It is intended for system builders connecting hard drives or SSDs to RAID controllers or server backplanes in enterprise storage environments.
28AWG Copper Wire and Tested Reliability
The assembly uses UL20276 28AWG copper conductors for low resistance and durable conductivity. Every unit is 100% open and short tested, withstanding DC 300V for .01 seconds and meeting insulation resistance of 10M and conductive resistance of 2.
6Gbps Single-Channel Bandwidth Limit
The interface supports 6Gbps per channel, which defines the maximum throughput for each connected drive. Builders requiring higher per-drive speeds or different protocols will need alternative interconnect solutions.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $33.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What bandwidth does the SFF-8644 interface support on this cable?
The SFF-8644 connector on this cable supports 6 Gbps single-channel bandwidth for server-to-storage data transfer.
What wire gauge and construction does the 2 metre cable use?
It uses UL20276 28AWG copper wire for conductivity and durability across the 2m length.
How do you connect the four SATA 7-pin ends to the drives?
Plug each SATA 7-pin connector directly into the drive's data port; the SFF-8644 end plugs into the controller or backplane.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs S3L0.5-90/180SL-50P SATA cable 6 in 90/180° 50-pack
- 6 in (15.2 cm)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
BUCIER M.2 Key M to PCIe 4.0 X16 Riser Cable 300mm SATA Power
- 8 GB/s
- Male-to-Female
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





