Vszerda Mini SAS SFF-8087 to 4 SATA 0.5 m 2 pack
Connects a controller with an SFF-8087 port to four SATA drives at 6 Gb/s per drive using 1.6 ft cables with strain relief and labelled connectors
- Rated speed6 Gbit/s
- Connector detailsSff-8087 to 4xsata
- Connector genderMale-to-Female
- Conductor typeStainless Steel
- Product typeMini SAS
- Key featuresData Transfer
- Connects RAID or PCIe controller to four SATA drives via SFF-8087 male
- Supports 6 Gb/s data transfer rate per connected drive
- Flexible ribbon cables with acetate cloth tape and woven mesh sheath for strain relief
- Low-profile SATA connectors with stainless steel latches prevent accidental disconnection
- Includes P1–P4 markers for easy port identification after installation
Mini SAS SFF-8087 to Four SATA
This Vszerda cable kit connects a RAID or PCIe controller equipped with an SFF-8087 port to four individual SATA drives or a backplane. Each 36-pin male Mini SAS connector breaks out to four 7-pin female SATA connectors rated for 6 Gb/s per drive. The pack contains two cables for multi-drive deployments.
Builders using SFF-8087 controllers
Suits system builders wiring internal storage arrays where the controller presents a single Mini SAS port and the chassis uses discrete SATA backplanes. The 0.5 m length fits compact enclosures. Not for external enclosures requiring eSATA, nor for direct drive attachment without a compatible controller.
6 Gb/s per SATA lane
Each of the four SATA lanes supports up to 6 gigabits per second, matching the SATA 3.0 specification. This bandwidth ceiling determines whether the cable meets the throughput needs of the attached drives.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 73% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Heretom |
| Model name | 8087-4xSATA-50-X2 |
| Product type | Mini SAS |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector details | Sff-8087 to 4xsata |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | Stainless Steel |
Questions about this item
Will the 36-pin SFF-8087 connector fit my existing RAID controller?
Yes, the 36-pin SFF-8087 male connector is designed for standard RAID or PCIe controllers with an SFF-8087 port.
How can I verify the 6 Gbps link is active on each drive?
Check the negotiated speed in your RAID BIOS or OS disk utility; each of the four SATA links should report 6 Gbps.
Does the pack include two cables with P1–P4 markers and latching SATA ends?
The 2-pack supplies two 1.6 ft breakout cables, each with P1–P4 labels and low-profile SATA connectors featuring stainless-steel latches.
More in SATA & eSATA Drive Cables
Similar items
Electop Black-02 SATA III 90° braided cable 20 in black 5-pack
- Sata 3
- Composite
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
2-Power ST345AP SATA to USB Type-A Cable 1.8 in Red
- 1.8 in (4.57 cm)
- Type
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





