Vszerda Mini SAS SFF-8087 to 4 SATA 0.5m 1.6ft Cable
Connects a Mini SAS SFF-8087 controller to four SATA drives using a 1.6 ft forward breakout cable with locking latches
- Rated speed6 Gbit/s
- Conductor typeCopper
- Product typeMINI SAS CABLE
- Product colorBlack+Blue
- Overall length1.6
- Key featuresMINI SAS SFF-8087 to SATA Cable
- Connects a SAS controller to four SATA drives
- 5 m length keeps internal routing tidy
- 6 Gbit/s per lane supports fast data transfer
- 30 AWG braided wires stay flexible in tight cases
- Locking latches on both ends secure every connection
Connection layout
This 0.5 metre breakout cable carries a single SFF-8087 male plug on the host side and splits to four SATA 7-pin female connectors for drives. It links a SAS controller or motherboard port directly to up to four SATA hard drives or SSDs, making it a practical choice for storage expansion in servers or workstations.
Sustained throughput
Each of the four SATA lanes is rated for 6 Gb/s, so the aggregate bandwidth available to the array scales with the number of active drives. The 30 AWG conductors and braided sheath keep signal integrity stable during long copy jobs or RAID rebuilds, while the locking latches on both ends prevent accidental disconnects under vibration.
Upgrade path
The cable replaces a direct backplane link when the controller presents an SFF-8087 port instead of native SATA headers, letting builders attach standard SATA drives without a backplane swap. It is not suited for configurations that require the SFF-8087 connector on the drive side or for SAS drives that need a native SAS target interface.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | MINISAS-001 |
| Product type | MINI SAS CABLE |
| Product color | Black+Blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Size & build | |
| Conductor type | Copper |
Questions about this item
Does the 0.5 m SFF-8087 breakout cable generate noticeable heat or draw extra power during continuous operation?
The cable is a passive copper assembly with no active electronics, so it adds no measurable heat or power draw when running all day.
What controller or motherboard port must I already have to use the SFF-8087 male connector?
You need a SAS HBA, RAID controller or motherboard with an internal SFF-8087 36-pin male port; the cable connects that host to four SATA drives.
Will the 6 Gbit/s SATA connectors work with older 3 Gbit/s hard drives I want to keep?
Yes, the SATA 7-pin targets are backward-compatible, so 3 Gbit/s drives will operate at their native speed on this breakout cable.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Cable Matters 104008-24x3 3-Pack 90° SATA Cable 24in Red
- Sata
- SATA





