Vszerda Mini SAS SFF-8087 to 4 SATA cable 3.3FT Red
Connects a Mini SAS SFF-8087 controller to four SATA drives at up to 12.0 Gbps total bandwidth over 3.3FT
- Connects one controller to four drives via SFF-8087 breakout
- 0 Gbps total bandwidth across four 3 Gbps lanes
- 36-pin Mini SAS male with latch locks to host port
- Four SATA 7-pin female connectors attach target drives
- 3 ft red cable routes cleanly inside chassis
Mini SAS SFF-8087 breakout cable
This cable converts a single Mini SAS SFF-8087 36-pin male connector into four SATA 7-pin female connectors. It links a SAS controller or backplane to up to four SATA hard drives or SSDs. Total length is 3.3FT (1.0 metre) and the jacket is red for easy identification in dense chassis. Data transfer rate reaches 12.0 Gbps across the four lanes.
Suits builders with SAS host ports
The assembly is intended for systems that expose a Mini SAS SFF-8087 port on the host side and require direct SATA drive attachment. It will not serve installations that need SATA-to-SAS direction, external eSATA connectivity, or more than four drive connections from one cable. Buyers who want more storage lanes or a different connector gender should look at something else.
Fits standard internal cabling routes
The 1 metre length reaches typical drive bays from a motherboard or HBA slot without excess slack. Each SATA connector locks securely to the target drive, while the Mini SAS latch secures the host end. No power leads are included, so separate SATA power cables from the PSU are required for each drive. The red sheath helps trace the loom during maintenance.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Typical for this category: the median of 1,954 items is $13.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does my controller need an SFF-8087 36-pin male port to use this cable?
Yes, the cable connects to a host or RAID controller with an SFF-8087 36-pin male connector with latch.
Will the 12.0 Gbps total bandwidth work with my older 3 Gbps or 6 Gbps SATA drives?
Each of the four SATA lanes runs up to 3 Gbps, so the cable is fully compatible with 3 Gbps and 6 Gbps drives.
How can I verify the link is running at the rated speed after installation?
Check the controller BIOS or OS drive information — each connected drive should report a 3 Gbps negotiated link speed per lane.
More in SATA & eSATA Drive Cables
Similar items
DKARDU NR-US-050 4-pack 22-pin SATA combo extension cable 50cm
- Optical
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
AYECEHI SATA III 6.0 Gbps cable 90° locking latch blue 12 inch 6 pack
- Sata
- Male-to-Male
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





