Vszerda Mini SAS SFF-8087 to 4 SATA cable 3.3FT Red breakout
Connects a Mini SAS SFF-8087 controller to four SATA drives with a 3.3 ft red cable supporting 12.0 Gbps total bandwidth
- Connects one controller to four drives using a single Mini SAS SFF-8087 36-pin male plug and four SATA 7-pin female sockets
- Delivers up to 12.0 Gbps total bandwidth with 3 Gbps per lane for high-throughput storage access
- 3 FT (1.0 m) red cable provides clear routing and easy identification inside the chassis
- Multi-lane breakout design simplifies cabling from a host controller to multiple target HDDs or backplanes
- Latching Mini SAS connector ensures a secure link that resists accidental disconnection during operation
Connection and length
This is a new Vszerda Mini SAS SFF-8087 to 4 SATA breakout cable measuring 3.3FT or 1.0 metre. A 36-pin male connector attaches to a controller while four SATA 7-pin female connectors link target hard drives. The assembly supports a total data transfer rate of 12.0 Gbps across the four lanes.
Suitable builds and limits
The cable suits builders who need to connect a Mini SAS SFF-8087 host port to up to four SATA drives inside a chassis. It will not suit installations that require an external Mini SAS connector, a straight SATA-to-SATA link, or a longer reach than 3.3FT.
Deciding specification
The single specification that decides fit is the 36-pin Mini SAS SFF-8087 male connector on the controller side; the host must present this exact interface for the cable to work.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the SFF-8087 connector fit my existing RAID controller?
The cable uses a Mini SAS SFF-8087 36-pin male connector with latch, matching standard controller ports.
How can I verify the 12.0 Gbps link is active after installation?
Check controller BIOS or OS disk utility for negotiated 12 Gbps per lane across all four SATA drives.
Does the 3.3FT red cable include the four SATA data connectors or must I buy them separately?
The assembly ships complete with one SFF-8087 male end and four SATA 7-pin female ends; no extra parts needed.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Cable Matters 104008-24x3 3-Pack 90° SATA Cable 24in Red
- Sata
- SATA





