Vszerda Mini SAS SFF-8087 to 4×SFF-8482 Breakout Cable with SATA Power 3.3FT
Connects a Mini SAS 36-pin SFF-8087 controller to four SFF-8482 drives with integrated SATA power at up to 6.0 Gbps per lane
- Connector genderMale-to-Male
- Product typeMini SAS
- Product colorBlack
- Connect RAID controller to four drives with single 3.3 FT cable
- Mini SAS 36-pin SFF-8087 plugs into host for direct link
- Four SFF-8482 connectors each add SATA power for drive operation
- Supports 6.0 Gbps per lane for high-throughput storage access
- Compatible with Adaptec RAID 1405 2405 3405 3805 5405 5445 5805 series
Connection Layout
This cable breaks a single Mini SAS 36-pin SFF-8087 male connector into four SFF-8482 male connectors, each with an integrated SATA power port. It is built for administrators and builders who need to attach four SAS hard drives to a RAID controller that exposes an internal SFF-8087 port. The 3.3 FT length suits typical server chassis routing.
Data Rate
Each lane supports up to 6.0 Gbps, so the four-lane link can deliver the throughput expected from 6 Gbps SAS drives. The point-to-point Serial Attached SCSI topology removes the termination and ID configuration steps required by parallel SCSI. Controllers not operating at 6 Gbps will still function, but the cable will not increase their native signalling speed.
Installation Notes
The SFF-8087 end plugs into the controller and each SFF-8482 end plugs directly into a drive backplane or drive connector; the adjacent SATA power receptacle must be fed from the system power supply. A common issue is forgetting to connect the SATA power leads, which leaves the drives unpowered despite a valid data link. Verify that the controller bracket or backplane allows enough clearance for the breakout fan-out near the SFF-8087 plug.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 73% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | EDIMS |
| Model name | SFF-8087 to 4×SFF-8482 with SATA Power |
| Product type | Mini SAS |
| Product color | Black |
| Ports & slots | |
| Connector gender | Male-to-Male |
Questions about this item
What does the 6.0 Gbps lane speed mean when the cable is connected to a RAID controller and four drives?
Each of the four lanes can transfer up to 6.0 Gbps, so the cable carries four independent 6.0 Gbps paths between the controller SFF-8087 port and the four SFF-8482 drive connectors.
Which interface standard does the SFF-8087 to SFF-8482 connection follow, and what does it limit?
The cable uses the Serial Attached SCSI (SAS) interface, which caps each lane at 6.0 Gbps and provides point-to-point links from the controller to each drive.
What physical connectors and clearance does the 3.3 FT breakout cable need to fit inside a server chassis?
It requires a 36-pin SFF-8087 male port on the controller side, four 29-pin SFF-8482 male ports plus SATA power connectors on the drive side, and enough cable routing space for a 1 metre length.
More in SATA & eSATA Drive Cables
Similar items
Electop Black-02 SATA III 90° braided cable 20 in black 5-pack
- Sata 3
- Composite
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
2-Power ST345AP SATA to USB Type-A Cable 1.8 in Red
- 1.8 in (4.57 cm)
- Type
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





