Vszerda Mini SAS SFF-8087 to 4x SATA Breakout Cable 0.5m
Connects a Mini SAS SFF-8087 controller to four SATA drives at 6 Gbps over 0.5 m
- Rated speed6 Gbit/s
- Connector detailsSff-8087 to 4x Sata
- Connector genderMale-to-Male
- Conductor typeComposite
- Product typeSATA
- Product colorSFF-8087 to 4SATA
- Connect at 6 Gbps with SATA III drives
- Link Mini SAS SFF-8087 host to four SATA targets
- Forward breakout design routes signal from controller to drives
- 30 AWG oxygen-free copper with triple braided shielding
- Hot-swap ready latching connector on 0.5 m cable
Host-to-Drive Breakout Cable
This 0.5 m cable bridges a Mini SAS SFF-8087 host port on a RAID controller or HBA to four SATA drives. It targets server builders and storage administrators who need direct backplane connectivity inside a chassis. The forward breakout design carries signals from the controller to the drives without a reverse path.
Sustained 6 Gbps Throughput
Rated at 6 Gbps per lane, the assembly maintains SATA III bandwidth across all four channels during continuous RAID rebuilds or backup streams. Triple-layer braided shielding and 100 Ohm impedance control suppress crosstalk in dense drive bays. Gold-plated contacts resist oxidation through repeated hot-swap cycles.
Enterprise-Grade Construction
30 AWG oxygen-free copper cores and an 8-pair wire layout deliver mechanical durability for rack installations. The 36-pin SFF-8087 male connector latches securely to the controller while four SATA females plug directly into drive backplanes. Crossover wiring matches standard server pin-outs and RoHS compliance meets data-centre procurement rules.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Ipolex |
| Model name | CAB-8087/4SATA-P0.5M (BT) |
| Product type | SATA |
| Product color | SFF-8087 to 4SATA |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector details | Sff-8087 to 4x Sata |
| Connector gender | Male-to-Male |
| Size & build | |
| Conductor type | Composite |
Questions about this item
Does the 0.5 m cable generate noticeable heat or draw extra power when drives run continuously?
The cable is passive copper with 30 AWG conductors and 100 Ohm impedance, so it adds no active heat or power draw during all-day operation.
What host-side connector must my controller or HBA provide for this breakout to plug in?
The host end requires a Mini SAS SFF-8087 36-pin male port, commonly found on RAID controllers and HBAs such as LSI or Dell PERC cards.
Will the 3.0 Gbps-rated cable limit my older 3 Gbps SATA drives in a mixed array?
The assembly supports up to 6 Gbps SATA III, so legacy 3 Gbps drives simply run at their native speed without bottleneck.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables





