Vszerda Mini SAS SFF-8088 26Pin Male to 4 SATA 7Pin Female Cable 2.0M
Connects a Mini SAS SFF-8088 controller to four SATA drives over a 2.0 m cable at 3.0 Gbps
- Rated speed3 Gbit/s
- Connector detailsScsi
- Connector genderMale-to-Female
- Conductor typeCopper
- Product typeMini sas
- Product colorMini SAS 8088 to 4x SATA
- Connects a Mini SAS controller to four SATA drives
- 26-pin SFF-8088 male plug with release ring for secure fit
- Four 7-pin SATA female connectors support multiple drives
- 0 Gbps transfer rate handles high-throughput storage workloads
- 0 metre length suits rack and workstation layouts
External SFF-8088 to four SATA breakout
The Vszerda cable carries an external Mini SAS 26-pin SFF-8088 male plug with a release ring on one side and four 7-pin SATA female connectors on the other. It links a host controller or RAID card directly to four SATA target drives or a backplane. The 2.0 metre length gives flexibility for routing between enclosures or across a rack. Copper conductors support the 3.0 gigabit per second signalling rate specified for this interface.
Build integration and cleared space
The single 26-pin plug replaces four separate cables from the controller, reducing clutter at the host side and freeing internal routing space. Each SATA connector attaches to a drive or backplane port without an additional adapter. The 30 AWG wire keeps the bundle manageable for tight cable-management channels. No power leads are included, so drive power must be supplied separately from the chassis or a dedicated power distribution board.
Sustained throughput behaviour
The SAS physical layer is backwards compatible with SATA, so the link negotiates at the drive's native speed up to the 3.0 gigabit per second ceiling. Under continuous read or write workloads the copper conductors maintain signal integrity across the full 2.0 metre run. The external SFF-8088 latch secures the host connection against vibration in rackmount environments. Builders needing more than four drives per controller or a higher signalling rate will require a different cable assembly.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $22.99
- Pricier than about 80% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Vszerda |
| Model name | CS0007 |
| Product type | Mini sas |
| Product color | Mini SAS 8088 to 4x SATA |
| Performance | |
| Rated speed | 3 Gbit/s |
| Ports & slots | |
| Connector details | Scsi |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | Copper |
Questions about this item
What throughput limit will I hit first when four SATA drives push sustained transfers through this 3.0 Gbps Mini SAS link?
The cable is rated for 3.0 Gbps per lane, so the Mini SAS 8088 interface itself becomes the bottleneck before the 30 AWG copper conductors saturate.
Does the 2.0 m length add noticeable heat or fan noise when the cable runs continuously in a rack?
The 30 AWG copper cable carries only signal current, so it produces no measurable heat and adds zero acoustic noise regardless of run time.
Which host-side connector must my controller already have for this SFF-8088 plug to seat correctly?
Your controller or HBA needs an external 26-pin SFF-8088 Mini SAS port with the release-ring latch.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1RR-10P SATA cable 1 m right angle 10 pack
- 3.28 ft (1m)
- SATA II
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
JSAUX JSUKNZUC2SAGY1P SATA to USB C Cable 5Gbps Grey
- 5 Gbit/s
- Male-to-Male
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
HETAI Digital Technology Co.,Ltd USB 3.0 to SATA Cable 2.5 inch 200mm Black
- Micro USB to USB A





