Vszerda Mini SAS SFF-8088 to 4 SATA cable 1.0M
Connects an external Mini SAS SFF-8088 controller to four SATA drives at up to 24 Gbps over 1.0 m
- Connects controller to four drives with 26-pin SFF-8088 male and four 7-pin SATA female ends
- Supports 24.0 Gbps total throughput at 6.0 Gbps per lane for fast data access
- 0 meter length suits external rack-to-backplane cabling in storage centres
- Latch-equipped SFF-8088 plug secures connection under vibration
- Black cable colour aids cable management in dense enclosures
Mini SAS SFF-8088 to 4 SATA cable
This 1.0 metre cable connects an external Mini SAS SFF-8088 controller to four SATA drives. The 36-pin male plug with a release latch mates with the host port, while four 7-pin female connectors attach to target drives or a backplane. It is built for data-centre storage links that need a simple external breakout.
Who this suits and who should look elsewhere
The cable suits administrators wiring external SAS controllers to SATA hard drives or SSDs in JBOD enclosures. Each lane runs at 6.0 Gbps for a combined 24 Gbps throughput. Builders who need internal SFF-8088 ports, a different connector count, or a longer reach should choose another assembly.
Specification that decides fit
The host interface is a 26-pin external Mini SAS SFF-8088 male connector; the device end provides four 7-pin SATA female connectors. Total length is fixed at 1.0 metre (3.3 ft). Verify that your controller presents an SFF-8088 port and that four SATA targets match your drive count.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $24.99
- Pricier than about 83% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What is the maximum total data transfer rate this cable supports?
The cable supports a total data transfer rate of 24.0 Gbps across four lanes at 6.0 Gbps per lane.
Does the Mini SAS connector include a latch mechanism?
Yes, the SFF-8088 male connector features a release ring latch for secure connections.
What type of controller port is required to use this cable?
An external Mini SAS 26-pin SFF-8088 host interface is required on the controller side.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
OWC In-Line Digital Thermal Sensor SATA Cable Kit for iMac 27" 2012-2019
- SATA
BUCIER SATA to USB 3.0 and USB C Adapter Cable with 12V/2A Power Adapter
- 10.8 Hz
- Plastic





