Vszerda Mini SAS SFF-8643 to 4x SATA Cable .5m 12Gbps 90°
Connects a Mini SAS SFF-8643 host port to four SATA drives at 12 Gbps with a 90-degree angle for tight spaces
- Rated speed12 Gbit/s
- Connector genderMale-to-Male
- Conductor typeCopper
- Product typeComponent
- Key featuresHigh Speed
- Connects controller to four drives
- 12 Gbps throughput for fast storage access
- 90° angled connector eases tight-space routing
- .5 m length keeps runs short and tidy
- Copper conductors maintain signal integrity
SFF-8643 to 4x SATA Cable .5m 12Gbps
This Vszerda cable connects a host Mini SAS SFF-8643 port on a motherboard or RAID controller to four SATA hard drives. The 0.5 metre length and 12 Gbps rating suit internal server storage builds. Copper conductors and a 90-degree connector angle assist routing in tight chassis. The male-to-male design links host and target devices directly.
For RAID controller to drive links not backplane use
Installers wiring a controller card to discrete SATA drives in a server will find the pin-out and angle convenient. The cable is not wired for backplane-to-drive connections, so builders attaching drives to a backplane SFF-8643 port must select a different assembly. The fixed 0.5 metre reach also limits use in larger enclosures where longer runs are required.
Host-side SFF-8643 port requirement decides fit
The single specification that determines compatibility is the presence of a host Mini SAS SFF-8643 connector on the motherboard or RAID controller. If the system only offers a backplane SFF-8643 port, the cable will not function. Verify the host port type before purchase.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Heretom |
| Product type | Component |
| Performance | |
| Rated speed | 12 Gbit/s |
| Ports & slots | |
| Connector gender | Male-to-Male |
| Size & build | |
| Conductor type | Copper |
Questions about this item
How can I confirm the 12 Gbps link is active after connecting the SFF-8643 to my RAID controller?
Check the controller BIOS or OS disk utility for a negotiated 12 Gbps link on each of the four SATA drives and run a short sequential read test to verify sustained throughput.
What connectors and cable length are included, and what must I supply separately?
The box contains one .5 m Mini SAS SFF-8643 male to four right-angle SATA male cables; you must provide the RAID controller or motherboard with an SFF-8643 port and the SATA hard drives.
Which cable version should I choose for a 12 Gbps internal RAID array in a tight chassis?
Select this .5 m 90-degree SFF-8643 to 4x SATA cable; its right-angle connectors fit confined spaces and the copper conductors support the 12 Gbps SAS specification.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables





