Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Internal SAS cable with 36-pin SFF-8643 connectors on both ends, 3.3 ft long, rated for 12 Gb/s
This Vszerda cable links two SFF-8643 Mini SAS HD ports inside a chassis. It suits builders wiring RAID controllers, JBOD enclosures or backplanes that use the high-density connector. The male-to-male assembly arrives new and ready for internal routing.
The 1.0 metre length reaches between adjacent drive cages or from a controller card to a backplane without excess slack. Thirty-six pins carry four lanes of SAS traffic through a 30 AWG black jacket. No shielding is fitted, so keep the run clear of noisy power cables.
Rated for SAS 3.0 at 12 Gb/s per lane, the cable also supports SAS 2.1 at 6 Gb/s for older gear. It handles four simultaneous 12 Gb/s lanes, saturating typical SSD or HDD arrays. Builds needing external ports or higher lane counts will need different cabling.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Vszerda |
| Product type | SAS |
| Product color | Mini SAS 8643 to Mini SAS 8643 |
| Performance | |
| Rated speed | 12 GB/s |
| Ports & slots | |
| Connector count | 36 |
| Connector details | Mini Sas |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | No |
The cable is rated for 12Gb/s SAS 3.0 and remains compliant with the SAS 2.1 6Gb/s specification for backward compatibility.
The 30AWG construction carries the 12Gb/s signal without active cooling; heat rise is minimal inside a typical chassis airflow.
The cable requires a female SFF-8643 port on both the controller and the drive backplane to complete the 36-pin link.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?