Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a 36-pin SFF-8087 port to four SATA drives at 6 Gbps per channel over 0.8 m
This new Vszerda cable splits a single internal MiniSAS SFF-8087 host port into four SATA 6Gbps device connections. It is built for servers, RAID controllers and storage enclosures that use a 36-pin SFF-8087 interface to attach SATA drives or backplanes.
The cable works when the controller or motherboard provides the MiniSAS SFF-8087 host side and the targets are SATA drives or a SATA backplane. It will not suit builds where the host connector is SATA and the target requires a MiniSAS plug, nor configurations that need an external MiniSAS interface.
Each of the four channels supports up to 6 Gbps across a 100 Ohm differential pair. The 0.8 metre ribbon assembly uses acetate cloth tape and a woven mesh sheath for strain relief and easier routing inside a chassis.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | 10Gtek |
| Model name | CB-001 |
| Product type | Internal Mini SAS HD Cable |
| Product color | 1PC |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector count | 64 |
| Connector details | Sff-8087 to 4x Sata |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | Data Transfer |
The cable requires a 36-pin SFF-8087 port on the host side to connect to a RAID controller or motherboard.
Yes, each 6 Gbps channel is backward compatible and will negotiate down to 3 Gbps with older SATA drives.
Check the RAID controller BIOS or OS disk utility; each of the four P1–P4 lanes should report a 6 Gbps link when a 6 Gbps drive is attached.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?