Vszerda MiniSAS SFF-8087 to SFF-8087 Cable 100 cm 2 Pack
A 100 cm Mini SAS SFF-8087 cable pair supports 6 Gbps SAS 2.0 with 36-pin connectors and stainless steel latches
- Supports 6 Gbps transfer speeds per SAS 2.0 spec
- Two cables included, each 100 cm long
- Works with common RAID cards and server brands
- Secure 36-pin SFF-8087 connectors with steel latches
- Braided exterior resists wear from repeated insertion
MiniSAS SFF-8087 cable for RAID arrays
This two-pack of MiniSAS SFF-8087 cables connects RAID controllers or server backplanes that use the 36-pin internal interface. Each 100 cm run supports data rates up to 6 Gbps under the SAS 2.0 specification. The assemblies are aimed at administrators building or servicing direct-attached storage in rackmount or tower servers.
Braided jacket and stainless latches
External braiding protects the conductors from abrasion during repeated routing or drive-swaps, while the stainless-steel latches on every 36-pin connector resist accidental unplugging under vibration. The construction avoids the plastic odour sometimes found on cheaper moulded cables, so the link stays clean in dense chassis.
Two 100 cm links for dual-controller setups
With two cables in the pack you can wire both paths of a dual-controller RAID card or connect a pair of JBOD enclosures to a single host. The fixed 100 cm length suits typical 2U-to-4U rack spacing but will not reach across full-height cabinets or between adjacent racks without an extension.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $31.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 36-pin SFF-8087 connectors or stainless steel latches need replacement after repeated use?
The connectors and stainless steel latches are built for frequent plug-and-play cycles and long-lasting use, so routine replacement is not expected under normal handling.
What speed ceiling appears first when the cable runs at full 6 Gbps throughput continuously?
The cable adheres to SAS 2.0 specifications, so the 6 Gbps link rate is the sustained performance limit defined by the standard.
Does the braided exterior or connector housing get hot when the cable carries data all day?
The braided construction and solid build are designed for continuous operation without emitting odors, indicating stable thermal behaviour during extended use.
More in SATA & eSATA Drive Cables
Similar items
OWC In-Line Digital Thermal Sensor HDD Upgrade Cable for iMac 2011
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Vantec CB-ST00U3 USB 3.0 to SATA Adapter Red 1.8 in
- 1.8 in (4.57 cm)
- SATA





