Vszerda Molex 4 Pin Male to 6 SATA Female Power Cable 30inch 70cm
Converts one Molex 4-pin connector into six SATA 15-pin power connectors for multiple drives over a 30-inch cable
- Connector detailsMolex 4 Pin to Sata
- Connector genderMale-to-Female
- Conductor typeOxygen
- Product typeHard-drive, CD-ROM, Computer fan Power Supply Cable
- Key featuresHigh Speed
- Powers up to six drives from one Molex connector
- 70 cm length gives flexible routing inside the case
- 15-pin SATA connectors deliver power to HDDs and SSDs
- Male-to-female design plugs straight into existing supply cables
- Oxygen conductor ensures reliable current delivery
One-to-six SATA power splitter
The Vszerda cable converts a single Molex 4-pin male connector into six 15-pin SATA female outputs. It lets builders run up to six hard drives, SSDs or compatible fans from one power-supply lead. The 70 cm length gives enough reach for most mid-tower layouts.
Replaces daisy-chained adapters
Instead of linking multiple one-to-two splitters, this single cable handles the whole chain. The jump is worth it when a PSU has limited Molex ports but the build needs several SATA devices. It reduces connector clutter and potential failure points in the power path.
Limited by Molex source current
All six SATA devices draw through the one Molex connection, so total current cannot exceed what that rail supplies. High-spin-up mechanical drives may trip protection if started together. The cable carries power only and does not transmit data signals.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 63% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | YiKaiEn |
| Model name | 759549561502 |
| Product type | Hard-drive, CD-ROM, Computer fan Power Supply Cable |
| Ports & slots | |
| Connector details | Molex 4 Pin to Sata |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | Oxygen |
Questions about this item
What clearance does the 1-to-6 SATA power splitter cable need inside the case?
The cable is 30 inch (70 cm) long, so allow that much routing space from the PSU Molex 4 Pin Male socket to the furthest 15 Pin SATA Female connector.
How do you connect the Molex 4 Pin Male to 6 SATA Female power cable without bending pins?
Insert the Molex 4 Pin Male into the PSU socket with the chamfered corners aligned — it seats one way — then press each 15 Pin SATA Female connector onto the drive until the latch clicks.
When should the oxygen-conductor Molex-to-SATA power cable be replaced?
Replace it if any 15 Pin SATA Female connector feels loose, shows melted plastic, or if drives intermittently lose power during operation.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATRD30CM 30cm SATA cable latching 6Gbps
- 11.81 in (30 cm)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Transway's Marketplace DT-5025D USB 2.0 to SATA 2.5" cable .5 ft
- Usb2.0 to sata and…
- Clear Blue
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





