Vszerda mSAS Cable SFF-8087 to 4 SATA 40 in
Connects a mini SAS SFF-8087 port to four SATA drives using a 40 in cable
- Product typeMini SAS
- Product colorBlack
- Overall length40
- Key featuresData Transfer
- Connects SFF-8087 controller to four SATA drives
- 40 inch length fits full-height server chassis
- Straight-through wiring keeps signal path clean
- Black jacket resists abrasion in dense racks
- Supports SAS and SATA backplane configurations
Connection Layout
This Vszerda cable breaks out a single SFF-8087 mini-SAS port into four individual SATA connectors. It lets a SAS or RAID controller talk to up to four SATA hard drives or a backplane in a server or storage chassis. The 40-inch length gives routing room inside larger cases or rack-mount enclosures.
Who It Fits
Builders adding SATA drives to a controller that only exposes mini-SAS ports will find the right pin-out here. It does not suit systems whose controller uses a different mini-SAS variant, installations that need a shorter or longer reach, or setups that require native SAS device connectors instead of SATA plugs.
Deciding Spec
The cable carries an SFF-8087 plug on one end and four SATA data connectors on the other, so the only compatibility check is whether the host side presents that exact mini-SAS interface.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | MITATTOK |
| Model name | 8087Sto4*SATA |
| Product type | Mini SAS |
| Product color | Black |
Questions about this item
What does the 40 in length mean once the cable is routed inside a chassis?
It gives you a one-metre run from the controller bracket to the drive backplane, with enough slack for cable-management channels and a gentle bend radius.
How does the SFF-8087 interface limit the SATA connections?
The mini-SAS plug carries four lanes, so each of the four SATA ends runs at single-lane SATA speed; the link will not exceed the controller's SAS lane rate.
What clearance does the SFF-8087 connector need behind the bracket?
The straight mini-SAS plug requires roughly 40 mm of depth behind the bracket for the latch to seat without stress on the PCB.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables





