Vszerda NVME to M.2 SATA Adapter JMB582 2230 2242 2260 2280
Converts an M-key NVMe slot to accept B+M key SATA SSDs in 2230, 2242, 2260 and 2280 sizes using a JMB582 chip
- Converts NVMe slot to SATA M.2 with JMB582 chip
- Supports 2230 2242 2260 2280 form factors
- M-key to B+M-key adapter for SATA SSDs
- Ready-to-use riser card for SATA / eSATA cables
NVMe to M.2 SATA Adapter with JMB582 Chip
This adapter converts an M-key NVMe slot into a B+M key interface for M.2 SATA SSDs. The JMB582 controller handles the protocol translation so a SATA drive can operate in a slot wired for NVMe. Supported module lengths are 2230, 2242, 2260 and 2280.
Suits builders adding SATA storage to an NVMe-only
Ideal when a laptop or desktop exposes only an M-key NVMe connector but the available drive is M.2 SATA. Not for users who need to run an NVMe drive in a SATA-only slot, nor for installations that require PCIe signal pass-through.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 73% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What M.2 slot key does my motherboard need for this JMB582 adapter?
Your motherboard must provide an M-key M.2 slot because the adapter plugs in as an M-key device.
Will a 2242 M.2 SATA SSD fit and work on this adapter?
Yes, the board accepts 2230, 2242, 2260 and 2280 length M.2 SATA SSDs via its B+M key connector.
More in SATA & eSATA Drive Cables
Similar items
Electop Black-02 SATA III 90° braided cable 20 in black 5-pack
- Sata 3
- Composite
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
2-Power ST345AP SATA to USB Type-A Cable 1.8 in Red
- 1.8 in (4.57 cm)
- Type
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





