Vszerda OCuLink SFF-8611 4i to 4 SATA 7P Left Angle 100CM
Connects an OCuLink SFF-8611 4i host to four SATA drives with 100 cm left-angle cables for tight spaces
- Connector detailsMini Sas
- Connector genderMale-to-Female
- Product typeSAS
- Overall length18
- Key featuresHigh-speed transfer, left-angle SATA connectors
- High-speed data transfer between OCuLink 8611 host and four SATA drives
- Left-angle SATA connectors improve cable routing in tight chassis spaces
- Durable materials maintain stable connections under continuous operation
- Flexible 100CM cable simplifies installation for technicians and DIY builders
- Expands storage by linking four SATA devices to a single 8611 port
Vszerda OCuLink SFF-8611 4i Cable
This cable connects an OCuLink SFF-8611 4i host port to four SATA drives using a single 100 cm assembly. It suits builders adding multiple hard drives or SSDs to a server or workstation where the host controller exposes the SFF-8611 interface. The left-angle SATA plugs help route wires in tight drive cages or shallow chassis.
Upgrade from straight SATA breakout cables
The left-angle connectors remove the bend radius that straight plugs need, so the cable fits where older looms would foul drive bays or side panels. The jump is worth it when chassis depth is limited or when four drives share a cramped backplane and cable routing dictates the build.
Sustained multi-drive transfers
High-speed signalling is maintained across all four lanes during long sequential reads or writes, such as RAID rebuilds or bulk video ingest. The 18 AWG conductors and shielded SAS construction keep signal integrity stable under continuous load rather than only in short benchmarks.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $30.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ST-JY |
| Model name | OCPCSF8611-4-4PST7PL |
| Product type | SAS |
| Ports & slots | |
| Connector details | Mini Sas |
| Connector gender | Male-to-Female |
Questions about this item
Does the 100CM length give enough slack for a full-tower case?
At 100CM the cable reaches from a rear-mounted OCuLink SFF-8611 4i port to drives in the front bays of most full-tower chassis with room to route behind the motherboard tray.
Which way do the four left-angle SATA 7P connectors point when plugged in?
Each left-angle SATA 7P connector exits toward the left side of the drive, so align the cable so the bend clears adjacent drives or the case wall before latching.
How often should the SFF-8611 4i end be reseated to keep SAS signal integrity?
Reseat the SFF-8611 4i connector only if you notice link errors or after moving the system; the gold-plated contacts are rated for many insertion cycles and do not need periodic maintenance.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Shenzhen Lianrui Information Technology SFF-8643 to SFF-8639 SATA Cable 80CM
- 80CM (2.6 ft)
- SFF-8643 to SFF-863…
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
j5create JUH377 USB 3.0 7-Port Hub 3 ft
- 3 ft (0.91 m)
- Male to Female





