Vszerda PCIe 4.0 Oculink SFF-8611 8X to 2 Mini SAS SFF-8087 Cable 50cm
Connects one Oculink SFF-8611 8X port to two Mini SAS SFF-8087 ports at PCIe 4.0 16 GT/s over 50 cm
- Single Oculink SFF-8611 8x expands to two Mini SAS SFF-8087 ports for flexible storage connectivity
- PCIe 4.0 support delivers 16 GT/s across 8 lanes for ultra-high data transfer speeds
- Backward compatible with PCIe 3.0, 2.0 and 1.0 for use across multiple system generations
- Braided exterior and robust construction withstand frequent plugging and unplugging for long service life
- 50 cm length suits compact server and data centre cable routing
PCIe 4.0 Oculink to Mini SAS Cable
The Vszerda cable connects a single Oculink SFF-8611 8x port to two Mini SAS SFF-8087 connectors, enabling flexible storage expansion in computers, servers and data centres. It is built with a braided exterior for durability during repeated connection cycles.
PCIe 4.0 Interface Limits
The cable supports the PCIe 4.0 standard at 16 GT/s across 8 lanes, while remaining backward compatible with PCIe 3.0, 2.0 and 1.0 systems. Bandwidth is constrained by the host controller and the PCIe generation actually negotiated by the attached devices.
50cm Length and Dual-Port Headroom
At 50cm (1.6ft) the cable suits internal chassis routing between a host adapter and two backplanes or drive cages. It handles high-throughput storage arrays comfortably, but cannot extend beyond the fixed length or serve configurations needing more than two SFF-8087 targets.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $33.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Should I choose a longer or shorter Oculink SFF-8611 8X to 2 Mini SAS SFF-8087 cable?
The 50 cm (1.6 ft) length keeps signal loss low for PCIe 4.0 speeds; choose a longer cable only if the 50 cm reach does not span your chassis.
What does the 16 GT/s figure mean once the cable is installed?
16 GT/s is the raw PCIe 4.0 signalling rate across 8 lanes; actual throughput depends on the controller and drives attached to the SFF-8087 ends.
Does the SFF-8611 8X interface limit speed when connected to PCIe 3.0 gear?
The cable is backward compatible with PCIe 3.0, 2.0 and 1.0, so the link will negotiate the highest speed both ends support.
More in SATA & eSATA Drive Cables
Similar items
BUCIER M.2 Key M to PCIe 4.0 X16 Riser Cable 300mm SATA Power
- 8 GB/s
- Male-to-Female
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs S3L0.5-90/180SL-50P SATA cable 6 in 90/180° 50-pack
- 6 in (15.2 cm)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





