Vszerda R14SF eSATA cable 25cm M.2 NVMe
M.2 NVMe to PCIe x1 signal extension cable, 25 cm wire length, supports PCIe 3.0 full-speed transfer up to 60 cm
- Conductor typeGold
- M.2 NVMe to PCIe x1 adapter with gold-plated contacts
- 25 cm flexible flat cable for tight builds
- PCIe 3.0 8 Gbps bandwidth on cables up to 60 cm
- Differential signals without via holes cut parasitic loss
- Short thick PCB avoids graphics-card clearance issues
M.2 NVMe to PCIe x1 adapter cable
This Vszerda R14SF cable connects an M.2 M-key NVMe SSD to a PCIe x1 slot for signal extension. The 25 cm flexible flat cable uses gold conductors and imported connectors. It is intended for professional engineers who understand compatibility risks and correct installation procedures.
PCIe 3.0 x1 sustained signal integrity
The differential signal design avoids via holes to reduce parasitic capacitance and inductance interference. Cable lengths up to 60 cm support full PCIe 3.0 8 Gbps bandwidth without CAF micro-short-circuit risk. Signal loss still occurs whenever any extension cable is inserted between motherboard and device.
Professional-only compatibility constraint
This adapter is restricted to professional engineers because incorrect assembly or reverse insertion can burn equipment. Many motherboards and devices exhibit different signal-driving ability, creating compatibility problems. Buyers who need a guaranteed plug-and-play solution for general use should not purchase this part.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $25.99
- Pricier than about 84% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Vszerda |
| Model name | N45324-B2 |
| Size & build | |
| Conductor type | Gold |
Questions about this item
Does the 25 cm cable add heat or noise when the NVMe drive runs continuously?
The cable is passive with gold conductors and no active components, so it adds no heat or noise of its own.
What must my system already have for this adapter to work?
You need a motherboard with a free PCIe x1 slot and an M.2 M-key NVMe drive; the board provides a straight x1 gold-finger male connector to the drive's female M.2 socket.
Will this work with an older PCIe 2.0 motherboard I want to keep?
The cable is rated for PCIe 3.0 x1 at 8 Gbps; on a PCIe 2.0 slot it will fall back to that slot's lower bandwidth.
More in SATA & eSATA Drive Cables
Similar items
Fervit Mini SAS HD SFF8643 to SFF8639 12Gbps SAS 3.0 Cable 39.37in with SATA 15Pin Y Power
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





