Vszerda SATA 3.0 cable 18 inches red 180 degree latch
An 18-inch SATA 3.0 data cable with a straight 180-degree locking latch and 26AWG tinned copper conductors for up to 6.0 Gbps transfers
- SATA 3.0 delivers up to 6.0 Gbps transfer speed
- 180 degree latch connector secures the link against vibration
- 18 inch red nylon braid keeps routing tidy inside the case
- 26 AWG tinned copper conductors maintain signal integrity
- Backwards compatible with SATA 1.0 and 2.0 ports
18-inch SATA 3.0 data cable
This 18-inch SATA 3.0 cable connects internal hard drives, SSDs or optical drives to a motherboard or controller. It is for builders upgrading storage or adding a drive in a standard desktop system.
Straight-to-180-degree latch connectors
One end is a straight 7-pin SATA plug and the other is a 180-degree angled plug, both with locking latches. The nylon braid protects the 26AWG tinned copper conductors. Route the angled end toward the drive to avoid tight bends; ensure the latch clicks fully or the link may drop to a lower speed.
6.0 Gbps maximum transfer rate
The cable is rated for SATA 3.0 at up to 6.0 Gbps and is backward compatible with SATA 1.0 and 2.0 ports. The actual throughput will be limited by the slowest connected device. This is a data-only cable and does not carry power.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How can I confirm the SATA 3.0 cable is running at 6.0 Gbps after installation?
Check the negotiated link speed in your motherboard BIOS or operating-system storage utility; it will show 6.0 Gbps when the drive and controller both support SATA 3.0.
Does the 18-inch red cable include a power connector or only the 7-pin data ends?
The package contains one sleeved data cable with a straight 7-pin connector on one side and a 180-degree 7-pin connector on the other; no power cable is included.
Should I choose the 18-inch length or a different size for a mid-tower build?
The 18-inch length suits most mid-tower layouts connecting a drive to a motherboard SATA port; measure your routing path to be sure.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
NEON Drive IEEE 1394 Firewire cable 4-pin to 9-pin 300cm 10-ft
- IEEE 1394(Firewire)
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





