Vszerda SATA 7Pin Male to Female 90 Degree Adapter 2pcs (N38489)
Right-angled SATA 7-pin male-to-female adapters redirect cables 90 degrees for tight chassis, two included
- Conductor typePlastic
- Product color2 PCS
- Changes SATA cable direction 90 degrees
- Fits low-profile chassis with 1.3 by 1.2 cm adapter
- Converts vertical ports to horizontal layout
- Male-to-female 7-pin connector keeps signal path intact
- Two adapters included for multiple drives
Tight-chassis SATA cable redirect
This pair of 90-degree SATA 7-pin male-to-female adapters lets you reroute a drive cable from vertical to horizontal inside a desktop case. They are built for builders working in limited-height chassis where a straight connector will not fit. The metal-and-plastic body measures about 1.3 by 1.2 cm. Two pieces are included for dual-drive setups.
Capacity and headroom
Each adapter simply changes the cable exit angle without altering the SATA signal path, so it supports any standard SATA SSD or hard drive at full interface speed. There is no active circuitry, so bandwidth and latency remain identical to a direct connection. The only limit is physical clearance; the right-angle bend needs roughly 1.3 cm of depth behind the drive or motherboard port.
Build integration
Plug the male end into a motherboard or controller SATA port and attach your existing 7-pin cable to the female end. No extra power, drivers or configuration are required. The compact footprint frees vertical space above the port, letting you close side panels or stack expansion cards that would otherwise foul a straight connector.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Typical for this category: the median of 1,954 items is $13.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Vszerda |
| Model name | N38489 |
| Product color | 2 PCS |
| Size & build | |
| Conductor type | Plastic |
Questions about this item
Will the 90-degree SATA adapter fit alongside my existing SATA cables in a low-profile case?
The adapter measures about 1.3 by 1.2 cm and reorients the 7-pin connector from vertical to horizontal, clearing space in limited-height chassis.
How can I verify the Vszerda N38489 adapter is seated correctly after installation?
The drive should be detected in BIOS and the operating system without errors, and the angled connector should sit flush against the motherboard port with no visible gap.
What comes in the package and do I need any extra cables?
The box contains two SATA 7-pin male-to-female converters; you still need your own SATA data cables to connect the drives.
More in SATA & eSATA Drive Cables
Similar items
DKARDU NR-US-050 4-pack 22-pin SATA combo extension cable 50cm
- Optical
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
AYECEHI SATA III 6.0 Gbps cable 90° locking latch blue 12 inch 6 pack
- Sata
- Male-to-Male
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





