Vszerda SATA cable 1 m 6-pack 90-degree straight-to-right-angle 30 AWG braided SATA III 6 Gbps
Six 1 m SATA III cables with straight-to-90° connectors and 30 AWG braided sleeves for 6 Gbps data links to 2.5 or 3.5 drives
- Product colorBlack/Blue
- 6 Gbps data rate supports fast storage upgrades
- 90-degree right-angle connector eases routing in tight cases
- 30 AWG braided cable bundles six leads for neat management
- 3 ft length reaches drives across full-size chassis
- Locking latch on each plug secures the data link
Six-cable SATA III kit
This pack supplies six SATA data cables, each 1 metre long, with a straight connector on one end and a 90-degree right-angle connector on the other. The cables are built from 30 AWG conductors and wrapped in a nylon braid that keeps the bundle tidy inside server chassis, RAID enclosures or mining rigs. Every lead carries a P1-to-P6 label so installers can trace individual channels quickly. No power conductors are included; drives must be powered separately.
6 Gbps headroom for mechanical
Rated to the SATA III specification, the cables support up to 6 Gbps transfer rates and remain backwards compatible with SATA I and SATA II devices. They comfortably handle 2.5-inch SSDs, 3.5-inch HDDs, optical drives and SAS controllers, with the practical throughput limited only by the attached equipment. The 12 G high-speed SAS-grade raw cable construction helps maintain signal integrity across the full length.
Straight-to-right-angle 7-pin connectors
Each cable terminates in a standard SATA 7-pin female plug on the straight side and a downward-angled 7-pin female plug with a locking latch on the right-angle side. The latch secures the connection against vibration in dense drive bays or hot-swap trays. This orientation is the deciding factor for builds where a straight plug would foul adjacent cards or drive-cage walls.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $31.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | SATA-011 |
| Product color | Black/Blue |
Questions about this item
Will the 1 m straight-to-right-angle SATA cables fit cleanly alongside older 3.5 HDDs in a tight server chassis?
The 90-degree right-angle connector keeps the cable close to the drive, and the 30 AWG braided bundle stays slim enough for crowded bays.
How can I confirm the 6 Gbps link is active after connecting the cables to my motherboard and drives?
Check the negotiated speed in BIOS or OS disk utilities; it will show 6 Gbps when the host controller and drive both support SATA III.
The pack lists six labelled cables — are power leads or mounting screws included?
Only the six 1 m SATA 7-pin data cables are supplied; power cables and screws must be sourced separately.
More in SATA & eSATA Drive Cables
Similar items
OWC In-Line Digital Thermal Sensor HDD Upgrade Cable for iMac 2011
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Vantec CB-ST00U3 USB 3.0 to SATA Adapter Red 1.8 in
- 1.8 in (4.57 cm)
- SATA





