Vszerda SATA cable 12 inch 3 pack blue locking latch 6Gbps
Three 12-inch SATA III cables with locking latches support 6 Gbps data transfer for SSDs, HDDs and optical drives
- Rated speed6 Gbit/s
- Connector detailsSata 7 Pin
- Conductor typeTin
- Product typeSATA Cables
- Product colorBlue
- Overall length12
- 6 Gbps data rate for fast storage upgrades
- 12 inch length keeps tight builds tidy
- Locking latch on every connector prevents accidental disconnects
- Thin 30 AWG blue cable improves airflow and routing
- Three labelled cables simplify RAID or multi-drive setups
Three-pack SATA III data cables
This set includes three straight SATA III cables, each 12 inches long, with blue 7-pin connectors and locking latches. They link motherboards or host controllers to SATA SSDs, hard drives, optical drives and RAID controllers. The thin 30 AWG conductors use a tin solder process for stable signalling. No software installation is required.
6 Gbps headroom for everyday drives
Each cable supports up to 6 Gbps data rates and is backwards compatible with SATA I and II devices. Actual throughput is limited by the attached drive and controller. The short length suits tight server chassis or compact builds where longer cables would obstruct airflow. They carry data only; drives must receive power separately.
Locking latch for secure connection
Every connector features a locking latch that prevents accidental disconnection during drive swaps or vibration. The cables are labelled P1 to P3 to simplify routing in multi-drive or RAID configurations. This mechanical retention is the deciding detail for builders who need cables that stay seated in dense enclosures.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 63% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | DC-0052 |
| Product type | SATA Cables |
| Product color | Blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector details | Sata 7 Pin |
| Size & build | |
| Conductor type | Tin |
Questions about this item
Will the 12 inch blue SATA III cables work with my older SATA I and SATA II drives?
Yes, the cables are backwards compatible with SATA I and SATA II hard drives, though data transfer speed is limited by the rating of the attached equipment.
How can I verify the 6 Gbps cables are performing correctly after installation?
Confirm the drives are detected in BIOS or operating system and check that reported link speeds match the SATA III 6 Gbps capability of the connected hardware.
What comes in the 3 pack and do I need separate power cables for my 2.5 and 3.5 inch drives?
The package includes three 12 inch straight SATA 7 pin data cables with locking latches labeled P1 to P3; drive power must be supplied separately.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATRD30CM 30cm SATA cable latching 6Gbps
- 11.81 in (30 cm)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Transway's Marketplace DT-5025D USB 2.0 to SATA 2.5" cable .5 ft
- Usb2.0 to sata and…
- Clear Blue
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





