Vszerda SATA III 6 Gbps cable 2 pack 18 inch straight and 90 degree locking latch
Two 18-inch SATA III cables — one straight and one 90-degree angled — each with a metal locking latch for a secure 6 Gbps connection
- Two cables in one pack for multiple drive installs
- Straight and 90-degree connectors fit tight spaces
- Locking latches keep connections secure during moves
- 18 inch length reaches most drive bays
- SATA III 6 Gbps speed handles modern SSD throughput
Vszerda SATA III 6 Gbps cable 2 pack
This bundle includes two 18-inch SATA III cables rated for 6 Gbps transfers. One cable has straight connectors on both ends, while the other features a 90-degree angled plug for tight drive bays. Both connectors use a metal locking latch to resist accidental disconnection. They are compatible with SATA hard drives, SSDs and optical drives.
Builders with cramped cases or stacked drive cages
The 90-degree cable solves clearance problems where a straight plug would press against a side panel or neighbouring component. The locking latch helps in systems that move or vibrate. Buyers who need longer runs or right-angle connectors on both ends should look elsewhere, as this pack only supplies the two specific cables described.
Six Gbps headroom for modern SSDs and HDDs
Each cable supports the full SATA III 6 Gbps link speed, so current solid-state and mechanical drives operate at their rated throughput. The connection remains backward compatible with SATA I and II devices. Performance will be limited by the drive and controller, not the cable, within the 18-inch length provided.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Do I need SATA ports on my motherboard or controller to use these cables?
Yes, each cable connects a SATA drive to a SATA port on the motherboard or an add-in controller; the drive and the host must both provide a SATA connector.
Will the 90-degree cable work with older SATA I or SATA II drives I already own?
The cables are backward compatible with SATA I and SATA II devices, so older drives will function at their native speeds when connected.
How can I confirm the link is running at 6 Gbps after installation?
Check the negotiated link speed in your BIOS, UEFI or operating-system storage utility; it should report 6 Gbps when both the drive and the port support SATA III.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Micro Connectors 12 Inches 15-pin SATA Male to Female Power Extension Cable
- 1 ft (0.3 m)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Micro Connectors SATA III straight to right-angle cable 20" black 3-pack
- Black





