Vszerda SATA-III cable 0.5 m 6-pack 6 Gbps
Six 0.5 m SATA 7-pin data cables rated for 6 Gbps, nylon-braided for tidy routing in servers and RAID setups
- Rated speed6 GB/s
- Conductor typeNylon
- Product typeSATA Cables
- Product colorBlack/Blue
- Overall length1.6
- Key features6 PCS/SET STRAIGHT SATA CABLES FOR SERVER
- Connect up to six drives with a single 6-pack
- 6 Gbps SATA III speed supports fast SSD and HDD transfers
- 5 m length keeps server and RAID builds tidy
- Nylon-braided 30 AWG conductors improve signal integrity
- Locking 7-pin connectors prevent accidental disconnection
Six-cable SATA-III set for dense builds
This pack contains six straight SATA 7-pin data cables, each 0.5 m long, rated for 6 Gbps transfers. They connect motherboards or host controllers to SSDs, HDDs, optical drives or RAID controllers in servers and embedded systems. The cables carry data only; drives must receive power separately. No software installation is required.
Braided nylon sleeve keeps airflow clear
A single 30 AWG nylon-braided sleeve bundles all six cables together, reducing clutter inside tight server chassis or Bitcoin-computer cases. Each connector has a locking latch to maintain signal integrity under vibration or repeated insertion cycles. The assembly meets the SATA 3.0 specification and remains backward compatible with SATA I and SATA II devices.
0.5 m length decides fit in cramped bays
At 1.6 ft the cables reach adjacent drive bays without excess slack, making them suited to 2.5 in and 3.5 in drive cages where longer leads would obstruct airflow. Builders needing longer runs or right-angle connectors for rear-mounted backplanes will need a different cable length or geometry.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | SATA-005 |
| Product type | SATA Cables |
| Product color | Black/Blue |
| Performance | |
| Rated speed | 6 GB/s |
| Size & build | |
| Conductor type | Nylon |
Questions about this item
Does the 6 Gbps cable generate noticeable heat or draw extra power when used continuously in a server?
The cable is a passive data link with no active components, so it produces no measurable heat and draws no power of its own.
What must already be present in the system for these SATA 7-pin cables to function?
Each drive needs a separate SATA power connector from the power supply, and the motherboard or controller must provide a matching SATA 7-pin port.
Will the 0.5 m cables work reliably with older SATA I or SATA II hard drives still in the build?
Yes, the cables meet the SATA 3.0 specification and are backwards compatible with SATA I and SATA II drives, operating at the speed the attached equipment supports.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Cable Matters 104008-24x3 3-Pack 90° SATA Cable 24in Red
- Sata
- SATA





