Vszerda SATA-III Cable 1M 4-Pack 90-Degree Straight-to-Right-Angle 6Gbps 3.3FT
Four 1 metre SATA III cables with straight-to-90-degree connectors support 6 Gbps transfers and include locking latches for secure data links
- Rated speed6 GB/s
- Conductor typeNylon
- Product typeSATA Cables
- Product colorBlack/Blue
- Overall length3.3
- Key featuresData Transfer
- Four cables in one pack simplify multi-drive builds
- 90-degree right-angle connectors ease routing in tight cases
- 6 Gbps SATA III speed with SATA I and II backward compatibility
- Locking latch on each connector keeps data links secure
- Nylon-braided 30 AWG wires improve cable management and signal quality
What you get
This pack contains four SATA data cables, each 3.3 feet long. Every cable has a straight connector on one end and a 90-degree right-angle connector on the other. The nylon-braided sleeve bundles the four leads together for tidier routing inside a case. No power conductors are included; drives must be powered separately.
Deciding spec
Each cable supports the SATA III standard with a maximum data rate of 6 Gbps. The 30 AWG conductors are rated for 12 Gbps SAS signalling, so the link runs at the speed of the attached drive and controller. Backward compatibility with SATA I and SATA II devices is maintained. A locking latch on each connector secures the connection against vibration.
Who it suits
Builders adding multiple 2.5 or 3.5 drives to a motherboard or RAID controller will appreciate the labelled P1–P4 ends and the mixed straight-to-right-angle geometry for tight spaces. The set is not for anyone needing a single cable, a different length, or a straight-to-straight or right-angle-to-right-angle orientation. It also cannot supply drive power.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 63% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | SATA-011 |
| Product type | SATA Cables |
| Product color | Black/Blue |
| Performance | |
| Rated speed | 6 GB/s |
| Size & build | |
| Conductor type | Nylon |
Questions about this item
What does the 6 Gbps rating mean once the cable is installed?
The 6 Gbps rating is the maximum interface speed; actual throughput depends on the drive and controller you connect, and the cable is backward compatible with SATA I and II devices.
Which SATA standard does this cable follow and what does that cap in practice?
It meets the SATA III specification, supporting up to 6 Gbps data rates while remaining compatible with older SATA I and II drives.
What clearance does the 90-degree connector need to fit?
The right-angle plug is designed for tight spaces such as server chassis or stacked drives; each cable is 3.3 ft long and uses a thin 30 AWG nylon-braided jacket for easier routing.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATRD30CM 30cm SATA cable latching 6Gbps
- 11.81 in (30 cm)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Transway's Marketplace DT-5025D USB 2.0 to SATA 2.5" cable .5 ft
- Usb2.0 to sata and…
- Clear Blue
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





