Vszerda SATA Power Y Splitter Cable 15 Pin Male to Dual Female 20cm 2pcs
A 20 cm SATA power Y-splitter converts one 15-pin male connector into two female ports, supporting 3.3 V, 5 V and 12 V for drives and other SATA devices
- Connector detailsSata
- Connector genderMale-to-Female
- Product typeSATA
- Key featuresTangle Free
- Converts one 15-pin SATA power connector into two
- Supports 3.3V, 5V, and 12V outputs for drives and PCI cards
- 20 cm flat cable reduces clutter and improves chassis airflow
- 18 AWG pure copper cores with PVC jacket for durable, stable power delivery
- Plug-and-play installation adds a drive without altering the original power supply
SATA Power Splitter for Dual Drives
This Vszerda Y-cable converts one 15-pin SATA power connector into two, letting a single PSU lead feed both a hard drive and an SSD. The 20 cm flat ribbon keeps routing tidy inside tight chassis and adds no measurable voltage drop across the 18 AWG copper cores. Builders who need to power more than two SATA devices from one connector will need additional splitters or a PSU with more native leads.
Voltage Limits of the SATA Standard
Each leg carries the standard 3.3 V, 5 V and 12 V rails defined by the SATA power specification, so any compliant drive or PCIe add-in card receives the correct voltages. The splitter itself does not regulate or boost power; total draw is still limited by the single PSU connector and the 18 AWG wire gauge. Systems that load both outputs near the connector’s rated current should verify the PSU can sustain the combined demand.
Upgrade from Molex Adapters or Daisy-Chained Leads
Replacing bulky Molex-to-SATA dongles or chained extensions with this 70 g pair reduces cable bulk and improves airflow without re-wiring the power supply. The plug-and-play design needs no drivers and works the moment the system is off and the connector is seated. If the PSU already offers enough native SATA plugs, the splitter adds no benefit and simply introduces another connection point.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Typical for this category: the median of 1,954 items is $13.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | YARCHONN |
| Product type | SATA |
| Ports & slots | |
| Connector details | Sata |
| Connector gender | Male-to-Female |
Questions about this item
How do I decide between the 20 cm cables and a longer option?
Each splitter is 20 cm long; the two‑pack gives two identical 20 cm Y‑cables so you can reach two devices from one PSU connector without excess slack.
What does the 15‑pin SATA connector actually deliver to my drive?
The 15‑pin male plug carries 3.3 V, 5 V and 12 V lines, and each female branch passes all three voltages to the attached HDD, SSD or optical drive.
Will the SATA power interface limit the current my drives can draw?
The cable uses 18 AWG pure copper conductors rated for standard SATA power loads, so it supports the normal current each 15‑pin device requires.
More in SATA & eSATA Drive Cables
Similar items
DKARDU NR-US-050 4-pack 22-pin SATA combo extension cable 50cm
- Optical
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
AYECEHI SATA III 6.0 Gbps cable 90° locking latch blue 12 inch 6 pack
- Sata
- Male-to-Male
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





