Vszerda SATA Power Y Splitter Cable 15 Pin Male to Dual Female 7 Inch 1 Pack
Turns a single SATA power connector into two 15-pin sockets for adding an SSD, hard drive or optical drive, using 18 AWG wire at 7 inches
- Turn one SATA power port into two for extra drives
- 7 inch / 20 cm length keeps cable runs tidy
- 18 AWG wire carries 3.3 V, 5 V and 12 V safely
- Powers 2.5 inch SSD, 3.5 inch HDD, DVD drive or PCIe card
- Single 15-pin male to dual 15-pin female connector design
What it is and who it is for
The Vszerda SATA Power Y Splitter Cable turns a single 15-pin SATA power connector into two female ports. It is designed for builders and upgraders who need to add a 2.5 inch SSD, 3.5 inch hard drive, DVD drive or PCIe Express card when the power supply has no spare SATA plugs.
The spec that decides fit
The splitter uses 18 AWG wire and carries 3.3V, 5V and 12V from the PSU across a 20 cm length. Verify that your power supply has enough spare capacity on its SATA rail before connecting additional drives.
How it fits the build
The 7 inch cable reaches nearby drive bays without excess slack, helping keep tower cable management tidy. It requires one free SATA power header on the PSU and provides two standard 15-pin female connectors for the target devices.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What does the 7 inch length mean once the cable is inside a real machine?
At 7 inches or 20 cm the splitter reaches from a power supply SATA connector to two drives mounted in adjacent bays without excess slack.
How does the 15 pin SATA interface cap what the splitter can deliver in practice?
The 15 pin SATA connector carries 3.3 V, 5 V and 12 V from the PSU, so the splitter passes those same rails to both female ports.
What does the 18 AWG wire gauge require for the splitter to fit or mount properly?
The 18 AWG conductors are flexible enough to route behind drive cages and through standard cable-management grommets in a tower chassis.
More in SATA & eSATA Drive Cables
Similar items
STARTECH PYO2LP4SATA 12in LP4 to 2 SATA power splitter cable
- 1 ft (0.3 m)
- Others
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Aoiutrn JMH-01 SATA Cable III 4 Pack 90 Degree Right Angle Straight 50cm 6Gbps 3.0
- Auxiliary
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





