Vszerda SATA to 3 Fan Splitter 16 inches Braided
Powers three 3-pin or 4-pin case fans from a single SATA 15-pin connector using a 16-inch braided cable
- Connector detailsDisplayPort
- Connector genderMale-to-Female
- Conductor typeCopper
- Product typeSATA
- Product colorBlack
- Overall length16
- Powers three case fans from one SATA connector
- 16-inch braided cable reaches across full-size cases
- 15-pin SATA male input plugs straight into PSU
- Three 3/4-pin fan headers run at constant 12 V
- Black braided sleeve protects wires and reduces clutter
Power three fans from one SATA connector
This adapter converts a single 15-pin SATA power connector into three 3-pin or 4-pin fan headers. It lets you run multiple case fans from one power supply output at a constant 12 V speed. The 16-inch braided cable keeps routing tidy inside the chassis.
Fans receive constant 12 V without PWM control
Each output header delivers 12 V on two active pins, so connected fans spin at full speed continuously. Motherboard fan-curve software cannot regulate these fans because the adapter does not pass a PWM signal back to the board. Builders needing variable speed must plug fans directly into motherboard headers instead.
Simple plug-in install with one routing caveat
Connect the SATA male end to any free power supply lead and attach up to three fans to the female headers. The only common issue is cable reach: the 16-inch length may fall short in full-tower cases where the power supply sits far from the top fan mounts. Measure your routing path before ordering.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | TeamProfitcom |
| Model name | 8541689798 |
| Product type | SATA |
| Product color | Black |
| Ports & slots | |
| Connector details | DisplayPort |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | Copper |
Questions about this item
Should I pick the 16-inch cable or a longer version for my case?
The cable is supplied in a single 16-inch length; measure the distance from your SATA power connector to the furthest fan header to confirm it reaches.
What does the 12V rating mean for my fans once installed?
All three fan connectors deliver a fixed 12V from the SATA rail, so every attached fan runs at its maximum constant speed.
Does the SATA 15-pin input limit the total power I can draw for three fans?
The splitter draws all power through one SATA 15-pin connector, so the combined current of the three fans cannot exceed what that single connector can supply.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
COMeap SATA power cable 6 pin to 3×15 pin 20 in 50 cm
- 6 Pin, Sata 15 Pin
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
ADCAUDX DC-0048 SATA cable 1.6 ft 5-pack
- Sata to Sata 7 Pin
- SATA Cables





