Vszerda SATA to 5×3/4-pin fan splitter 27 cm 2-pack
Splits one SATA power connector into five 3-pin or 4-pin fan headers to run up to five 12 V case fans from a single PSU cable
- Connector detailsSata to 3pin 4 Pin
- Connector genderMale
- Product typeSATA
- Key featuresBraided
- Powers five fans from one SATA connector
- Braided nylon sleeve protects the 27 cm cable
- Galvanised copper conductors rated for 12 V operation
- Two splitters included for dual-fan configurations
- Standard 24 AWG 1007 wire handles 12 V current
Power source for multiple fans
This pack contains two adapter cables that convert a single 15-pin SATA power connector into five 3-pin or 4-pin fan headers. Each 27 cm braided cable lets you run up to five 12 V case fans from one power supply connection. The 24 AWG copper conductors and nylon sleeving provide durable power delivery inside the chassis.
Builders needing simple fan expansion
The splitter suits anyone adding several chassis fans when motherboard headers are full or current-limited. It does not suit builders who require PWM speed control or voltage regulation for their fans. Buyers needing fan speed management should look at a powered hub or controller instead. The fixed 12 V output means every connected fan runs at full speed.
Fixed 12 V output with no speed control
The single specification that decides fit is the inability to control fan speed. The cable delivers constant 12 V power to all five headers without PWM or voltage adjustment. If your build requires quiet operation or thermal curves, this adapter will not meet that need. For basic maximum airflow it works reliably.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | YARCHONN |
| Product type | SATA |
| Ports & slots | |
| Connector details | Sata to 3pin 4 Pin |
| Connector gender | Male |
Questions about this item
Does the 12 V SATA splitter get hot or noisy when powering five fans continuously?
The adapter is a passive cable with no active electronics, so it produces no noise and negligible heat; the 24 AWG copper conductors handle the combined fan current without measurable temperature rise.
What must my power supply provide for this 15-pin SATA male connector to work?
A standard SATA power lead from the PSU is required; the splitter draws 12 V directly from that connector to feed up to five 3-pin or 4-pin fans.
Will my older 3-pin chassis fans run at full speed on this splitter?
Yes, the cable supplies constant 12 V to both 3-pin and 4-pin fans, but it cannot regulate or report speed, so 3-pin fans will spin at their maximum rated RPM.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
COMeap SATA power cable 6 pin to 3×15 pin 20 in 50 cm
- 6 Pin, Sata 15 Pin
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
ADCAUDX DC-0048 SATA cable 1.6 ft 5-pack
- Sata to Sata 7 Pin
- SATA Cables





