Vszerda SF-004-1.0M Mini SAS SFF-8087 to 4 SATA 7pin 6Gbps 100cm
Connects four SATA drives to a Mini SAS SFF-8087 controller at 6 Gbps over 100 cm
- Rated speed6 Gbit/s
- Connector detailsSff-8087 & Sata
- Connector genderMale-to-Female
- Conductor typeCopper
- Product typeMini-SAS
- Product colorCopper
- Connect four SATA drives to one Mini SAS SFF-8087 port
- 6 Gbps transfer speed supports fast RAID arrays
- 100 cm length fits full-tower server chassis
- Copper conductors maintain signal integrity at 6 Gbps
- Compliant with SAS 2.1 specification for reliable operation
Vszerda SF-004-1.0M Mini SAS Cable
This Vszerda SF-004-1.0M cable connects four SATA hard disks to a single Mini SAS SFF-8087 host port. It is built for internal server and RAID configurations that require a 1-to-4 breakout from a controller. The copper conductors carry data at 6Gbps across a 100cm length.
SFF-8087 to four SATA 7-pin breakout
The decisive specification is the connector pairing: one Mini SAS SFF-8087 male plug on the host side and four SATA 7-pin female receptacles on the drive side. This exact layout lets a single controller port address four separate SATA targets without an expander backplane.
Copper construction meets SAS 2.1 standard
The cable uses copper conductors specified to the SAS 2.1 standard for 6Gbps operation. No additional software, drivers or power adapters are included in the bundle; the accessory change is purely the physical breakout that consolidates four drive connections into one controller slot.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Vszerda |
| Model name | SF-004-1.0M |
| Product type | Mini-SAS |
| Product color | Copper |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector details | Sff-8087 & Sata |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | Copper |
Questions about this item
Will the 6 Gbps rating let each of my four SATA drives run at full SATA III speed when plugged into this cable?
Yes — the SFF-8087 host connector follows the SAS 2.1 standard and delivers 6 Gbps per lane, so every attached SATA 7-pin drive can operate at its native 6 Gbps rate.
Does the SFF-8087 connector limit me to SAS 2.1 speeds even if my controller supports SAS 3.0?
The cable is built to the SAS 2.1 specification, so its maximum throughput is 6 Gbps per lane regardless of the controller generation.
How much room do I need inside the chassis to route the 100 cm cable from the controller to four drive bays?
The 1.0 metre length gives enough slack to reach widely spaced bays in a typical server or workstation chassis.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables





