Vszerda SF-060 OCuLink SFF-8611 to SFF-8654 Active Cable 50cm
Active OCuLink cable connects a SFF-8611 controller to a SFF-8654 backplane at up to 8Gbps over 50cm with locking latches
- Conductor typeCopper
- Product colorBlack
- Connect backplane to controller via SFF-8611 to SFF-8654
- 50cm length fits tight server chassis
- Active latch secures connection under vibration
- Copper conductor supports 8Gbps data rate
- Requires free OCuLink interface on host
Vszerda SF-060 OCuLink Active Cable 50cm
This Vszerda SF-060 cable links an OCuLink SFF-8611 4i host port to a Slimline SFF-8654 device connector. It carries PCIe data at up to 8Gbps over a 50cm copper run. An active latch secures each end against vibration. The assembly is built for internal chassis routing.
Builders connecting backplanes to controllers
The cable suits integrators wiring a backplane with SFF-8654 ports to a RAID card or motherboard with an OCuLink SFF-8611 4i interface. It is not for external drive enclosures or legacy SATA and eSATA cabling. Systems without a free OCuLink header cannot use this link.
8Gbps PCIe over copper with active latching
The 8Gbps signalling rate decides whether the link saturates your SSD or RAID array. Copper conductors and the active latch maintain signal integrity across the 50cm span. Verify your controller and backplane both specify SFF-8611 and SFF-8654 before ordering.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $18.99
- Pricier than about 70% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Vszerda |
| Model name | SF-060 |
| Product color | Black |
| Size & build | |
| Conductor type | Copper |
Questions about this item
Which controller port do I need free to plug in the SFF-8611 end?
You need a free OCuLink SFF-8611 4i port on your controller or motherboard.
Will this cable work with a legacy SATA backplane I already own?
No, the SFF-8654 connector is not compatible with standard SATA or eSATA ports.
How do I confirm the active latch is engaged after installation?
Push each connector until the latch clicks audibly and the cable resists a gentle pull.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
CableCreation Mini SAS SFF-8087 to Right Angle SFF-8087 Cable 2.5FT
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
KEHIPI E55 SATA to USB 3.0 Adapter Cable 9 Inches Grey
- Usb a 3.0
- Male-to-Male





