Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects RAID cards or backplanes to SAS and SATA drives at 6 Gbps over 1.6 m with locking 36-pin SFF-8087 connectors
This new Vszerda SFF-8087 Internal Mini SAS Cable is a 1.6m Male-to-Male assembly rated for 6 Gbps data transfer. It uses a 36-pin connector on each end and is built for server and storage environments. The 100-Ohm shielded ribbon construction supports hot-swap SATA and SAS drive bays.
The cable fits internal SAS or SATA storage systems, HBA interfaces and direct-attached storage where a 36-pin SFF-8087 link is required. Builders needing a different pin count, an external connector style, or a longer reach for the same internal run should look at other assemblies.
The single specification that decides fit is the 36-pin SFF-8087 Male-to-Male interface operating at 6 Gbps. If your backplane or RAID controller calls for this exact connector and speed, the cable matches; otherwise it will not connect.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | 10Gtek |
| Product type | Internal Mini SAS HD Cable |
| Product color | 1PC |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector count | 36 |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | Data Transfer |
The industrial-grade braided mesh jacket and stainless steel latch are built for secure connections in server RAID systems and hot-swappable drive bays.
The cable is specified for 6 Gbps transfers over four lanes with 100-ohm impedance, matching the SAS 4-lane design used in server and storage applications.
The passive copper assembly has no active components; heat is limited to normal conductor loss at 6 Gbps and the braided jacket aids dissipation.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?