Vszerda SFF-8087 to 4x SATA forward breakout cable 3.3ft
Connects an SFF-8087 RAID controller to four SATA drives at up to 6 Gbps per port over a 3.3 ft blue cable with black mesh sleeving and labelled connectors
- Connect RAID controller to four SATA drives via SFF-8087
- Up to 6 Gbps per SATA port for fast transfers
- 3 ft length fits compact server chassis
- Latch-locking connectors secure host and target links
- Woven mesh sleeve protects half the cable for routing
Vszerda SFF-8087 breakout cable
This internal cable connects a RAID or PCIe controller with an SFF-8087 port to four SATA drives. It is built for system builders adding direct-attached storage to a server or workstation. The forward breakout design links a single host connector to four target connectors.
Sustained throughput at 6Gbps per drive
Each of the four SATA ports supports up to 6Gbps data transfer, matching the SATA III specification. The woven mesh sheath covers half the length to aid routing without trapping heat. Latch locking on both ends maintains a secure connection during continuous operation.
3.3ft length sets the reach
The fixed 3.3ft cable determines how far the controller can sit from the drive backplane. Measure the internal path in your chassis before ordering; the length cannot be adjusted. Buyers needing a longer run or a different connector orientation will need another solution.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How much heat or power draw should I expect from the SFF-8087 to 4x SATA breakout cable when it runs continuously?
The cable is a passive copper assembly with no active components, so it adds no measurable heat or power draw to the system.
What host-side connector must my RAID or HBA card provide for this SFF-8087 cable to attach?
The host side requires a male SFF-8087 Mini SAS port with latch locking, compatible with PCIe 2.0 x8 lane controllers.
Will the 6Gbps per-port rating work reliably with older 3Gbps SATA drives I already have installed?
Yes, the SATA interface is backward compatible, so 3Gbps drives will operate at their native speed on each of the four ports.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables





