Vszerda SFF-8088 to SFF-8088 External Mini SAS HD Hybrid Cable 1m
A 1 m external Mini SAS HD cable with SFF-8088 male connectors on both ends, rated for 6 Gbps SAS 2.1 links between RAID cards, JBOD enclosures or legacy server backplanes
- Rated speed6 Gbit/s
- Connector detailsSff-8088 to Sff-8088
- Connector genderMale-to-Male
- Conductor typeCopper
- Product typeExternal Copper SAS Cable
- Product colorSFF-8088 to SFF-8088
- 6 Gbps data rate via SAS 2.1 compliant link
- 1 m length with pull tabs for easy rack access
- 26-pin SFF-8088 male connectors on both ends
- AWG30 twinaxial 8-pair copper for low-skew signal
- Die-cast zinc housings with protective caps shield connectors
26-Pin SFF-8088 External SAS Cable
This 1 m SFF-8088 to SFF-8088 hybrid cable links external RAID controllers or HBA cards to JBOD enclosures and legacy server backplanes. It uses AWG30 twinaxial copper conductors in an 8-pair layout to deliver 6 Gbps signalling compliant with SAS 2.1. Die-cast zinc connector housings with protective caps and pull tabs simplify handling in dense rack environments.
Suits administrators wiring 6 Gbps external SAS
Installers who need internal Mini SAS HD ports, higher signalling rates, or fibre-channel interfaces must choose a different product. The male-to-male gender and fixed 1 m length also limit use in setups requiring female bulkheads or longer runs between racks.
SAS 2.1 compliance at 6 Gbps
This single specification defines the maximum data rate and protocol level the cable supports, determining whether it matches the controller and backplane firmware in your deployment.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $27.99
- Pricier than about 86% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Ipolex |
| Model name | CAB-8088/8088-P1M-1pc |
| Product type | External Copper SAS Cable |
| Product color | SFF-8088 to SFF-8088 |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector details | Sff-8088 to Sff-8088 |
| Connector gender | Male-to-Male |
| Size & build | |
| Conductor type | Copper |
Questions about this item
Should I choose the 1 m or 3.28 ft length for my rack?
Both figures describe the same cable; select the unit that matches your rack plan.
What does the 6 Gbps rating mean when the cable is installed?
It delivers up to 6 Gbps per lane across the 8-pair twinaxial conductors between a SAS HBA and an external drive subsystem.
How does the SAS 2.1 interface limit real-world throughput?
The SAS 2.1 standard caps each lane at 6 Gbps, so aggregate bandwidth depends on the number of active lanes in your controller and backplane.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





