Vszerda SFF-8482 to SATA data cable 70 cm with 15 cm LP4 power
Connects a 29-pin SAS drive to a 7-pin SATA controller with separate 15 cm LP4 power
- Connect SAS drives to SATA controllers using 29-pin SFF-8482 connector
- Power the drive directly from a 4-pin LP4 Molex supply
- 70 cm data cable reaches across full-height chassis
- 15 cm power tail fits tight drive bays
- Supports 6 Gbps transfer rate for fast SAS storage
SFF-8482 to SATA adapter cable
This adapter connects a 29-pin SAS drive to a SAS-compatible SATA controller while supplying power through a 4-pin Molex LP4 plug. It is built for technicians integrating SAS storage into systems that only offer SATA host ports.
70 cm data reach with 15 cm power tail
The 70 cm data length gives routing flexibility inside a chassis or to an external enclosure, while the short 15 cm LP4 lead keeps the power connection close to the drive. Transfer rates run up to 6 Gbps, matching the SATA 6 Gbps ceiling.
Single-drive SAS integration without a backplane
The cable plugs directly into a motherboard or RAID controller SATA port and draws drive power from a standard Molex supply connector, removing the need for a SAS backplane. It suits builds adding one SAS drive where only SATA host ports and Molex power are available.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 70 cm SFF-8482 to SATA cable reach from my SAS controller to a drive in a full-tower case?
The data cable is 70 cm long and the LP4 power tail adds 15 cm, giving enough slack for most full-tower layouts.
How can I verify the link is running at the supported 6 Gbps after I connect the 29-pin SFF-8482 end to my SAS backplane?
Check the controller BIOS or OS disk utility; it will display the negotiated link speed for the attached drive.
Does the package include a SATA power cable for the drive or only the LP4 molex connector shown?
The box contains the SFF-8482 to 7-pin SATA data cable with an integrated 15 cm LP4 male power connector; a separate SATA power cable is not included.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Cable Matters 104008-24x3 3-Pack 90° SATA Cable 24in Red
- Sata
- SATA





