Vszerda SFF-8482 to SATA Right-Angle 7P Cable 50CM
A 50 cm SAS SFF-8482 to SATA cable with a right-angle 7-pin connector for tight-space drive connections
- Connector detailsMini Sas
- Connector genderMale-to-Female
- Product typeSAS to SATA
- Overall length18
- Key featuresHigh-speed transfer, space-saving design
- Converts SAS SFF-8482 drives to standard SATA ports
- Right-angle 7-pin connector saves space in tight builds
- 50 cm length gives flexible routing inside the case
- Male-to-female gender enables direct drive-to-controller links
- High-speed transfer support keeps data moving reliably
SAS SFF-8482 to SATA adapter
This 50 cm converter cable bridges a SAS SFF-8482 male port to a right-angle SATA 7-pin female connector, letting builders attach SAS drives to standard SATA host ports. It suits storage upgrades, server migrations and test-bench work where a direct SAS backplane is not available.
Passive cable thermals and power
As a passive copper assembly the cable adds no active heat or noise to the system and draws no auxiliary power. Signal integrity is maintained over the 50 cm run without external supply, keeping the host and drive power budgets unchanged.
Right-angle 7-pin build and daily use
The moulded right-angle SATA head reduces strain in cramped drive bays and improves airflow by keeping the cable flat against the chassis. Male-to-female gendering means the SAS end plugs into the drive while the SATA end accepts a standard host cable, simplifying rack swaps and bench testing.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 63% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ST-JY |
| Model name | SFF8482-STR7P |
| Product type | SAS to SATA |
| Ports & slots | |
| Connector details | Mini Sas |
| Connector gender | Male-to-Female |
Questions about this item
How do I install the Vszerda SFF-8482 to SATA cable and which orientation mistake should I avoid?
Plug the male SFF-8482 end into the SAS drive or backplane and the right-angle female 7-pin end into the SATA port; the step people get wrong is forcing the right-angle connector the wrong way — align the keyed L-shape so the cable exits toward the chassis side, not toward the motherboard, or the latch will not seat.
What maintenance or replacement will the Vszerda SFF-8482 to SATA cable need later?
No scheduled maintenance is required; inspect the latch clips and gold contacts during hardware changes and replace the 50 cm cable if the right-angle hood cracks, pins bend, or intermittent link errors appear on the SAS drive.
What limit appears first on the Vszerda SFF-8482 to SATA cable under sustained heavy transfers?
The 50 cm length and passive copper construction mean signal integrity degrades first on continuous high-rate SAS traffic; keep the cable routed away from power lines and avoid tight bends at the right-angle joint to maintain a stable link.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATRD30CM 30cm SATA cable latching 6Gbps
- 11.81 in (30 cm)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Transway's Marketplace DT-5025D USB 2.0 to SATA 2.5" cable .5 ft
- Usb2.0 to sata and…
- Clear Blue
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





